Publicado

2026-11-09

Agregación espacial e interpretación multiescala de resultados geomecánicos en una galería en carbón: estudio numérico sintético

Spatial aggregation and multiscale interpretation of geomechanical results in a coal roadway: a synthetic numerical study

DOI:

https://doi.org/10.15446/rbct.n60.129747

Palabras clave:

agregación espacial, análisis paramétrico, elementos finitos, excavaciones subterráneas, geomecánica, minería de carbón, modelación numérica (es)
coal mining, finite elements, geomechanics, numerical modelling, parametric analysis, spatial aggregation, underground excavations (en)

Descargas

Autores/as

Se evaluó cómo la región espacial de agregación modifica la interpretación de simulaciones geomecánicas de una galería en carbón mediante un modelo bidimensional sintético, sin calibración de campo. Se analizaron desplazamientos incrementales, cambios de abertura y esfuerzos en 72 escenarios distribuidos en seis experimentos, según distancia al contorno y unidad litológica. En el barrido de K0 de 0,25 a 1,00, el percentil 95 del cortante máximo bidimensional disminuyó 78,2 % en el dominio completo y 13,1 % dentro de 1 m del contorno. Se identificaron 69 posiciones con cortante igual o superior al P95 del entorno de 10 m por escenario en al menos la mitad de los escenarios; estas se conservaron al asignar igual peso a los experimentos. En la arcillolita de piso, la cohesión modificó principalmente el máximo de cortante. La interpretación depende de la selección espacial y del estadístico, dentro de las configuraciones evaluadas.

This study examined how spatial aggregation affects the interpretation of geomechanical simulations using a synthetic two-dimensional coal roadway model without field calibration. Incremental displacements, opening changes, and stresses were analyzed across 72 scenarios in six experiments, by distance from the excavation boundary and lithological unit. In the K0 sweep from 0.25 to 1.00, the 95th percentile of maximum in-plane shear stress decreased by 78.2% over the entire domain and 13.1% within 1 m of the boundary. Within 10 m of the boundary, shear stress at 69 locations reached or exceeded the scenario-specific P95 in at least half the scenarios; this set remained unchanged under equal experiment weighting. In the floor claystone, cohesion primarily affected maximum shear stress. Interpretation therefore depends on spatial selection and the summary statistic, within the configurations examined.

Referencias

[1] Rivera, M.E., Delgado-Rodríguez, J.R., Monroy-Gallo, J.M., y Velandia-Tarazona, J.E., Geología, litoestratigrafia, determinación de la calidad y clasificación de carbones de El Espino-Boyacá, Colombia. Boletín de Ciencias de la Tierra, 40, pp. 16–23, 2016. DOI: https://doi.org/10.15446/rbct.n40.40198.

[2] Coggan, J., Gao, F., Stead, D., and Elmo, D., Numerical modelling of the effects of weak immediate roof lithology on coal mine roadway stability. International Journal of Coal Geology, 90–91, pp. 100–109, 2012. DOI: https://doi.org/10.1016/j.coal.2011.11.003.

[3] Jing, L., A review of techniques, advances and outstanding issues in numerical modelling for rock mechanics and rock engineering. International Journal of Rock Mechanics and Mining Sciences, 40(3), pp. 283–353, 2003. DOI: https://doi.org/10.1016/S1365-1609(03)00013-3.

[4] Potts, D.M., Numerical analysis: a virtual dream or practical reality? Géotechnique, 53(6), pp. 535–573, 2003. DOI: https://doi.org/10.1680/geot.2003.53.6.535.

[5] Esterhuizen, G.S., Gearhart, D.F., Klemetti, T., Dougherty, H., and Van-Dyke, M., Analysis of gateroad stability at two longwall mines based on field monitoring results and numerical model analysis. International Journal of Mining Science and Technology, 29(1), pp. 35–43, 2019. DOI: https://doi.org/10.1016/j.ijmst.2018.11.021.

[6] Esterhuizen, G.S., Klemetti, T., Sears, M.M., Zhang, P., van Dyke, M., Dougherty, H., and Tulu, I.B., Assessing Longwall Gateroad Ground Response and Support Alternatives. Mining, Metallurgy and Exploration, 38, pp. 1739–1759, 2021. DOI: https://doi.org/10.1007/s42461-021-00430-x.

[7] Basarir, H., Sun, Y. and Li, G., Gateway stability analysis by global-local modeling approach. International Journal of Rock Mechanics and Mining Sciences, 113, pp. 31–40, 2019. DOI: https://doi.org/10.1016/j.ijrmms.2018.11.010.

[8] Dark, S.J., and Bram, D., The modifiable areal unit problem (MAUP) in physical geography. Progress in Physical Geography, 31(5), pp. 471–479, 2007. DOI: https://doi.org/10.1177/0309133307083294.

[9] Wickham, H., Tidy data. Journal of Statistical Software, 59(10), pp. 1–23, 2014. DOI: https://doi.org/10.18637/jss.v059.i10.

[10] Sandve, G.K., Nekrutenko, A., Taylor, J., and Hovig, E., Ten simple rules for reproducible computational research. PLOS Computational Biology, 9(10), art. e1003285, 2013. DOI: https://doi.org/10.1371/journal.pcbi.1003285.

[11] Saltelli, A., and Annoni, P., How to avoid a perfunctory sensitivity analysis. Environmental Modelling & Software, 25(12), pp. 1508–1517, 2010. DOI: https://doi.org/10.1016/j.envsoft.2010.04.012.

[12] Geraili-Mikola, R., ADONIS: a free finite element analysis software with an interactive graphical user interface for geoengineers. GeoOttawa 2017, Ottawa, Canadá, [online]. 2017. Available at: https://www.researchgate.net/publication/320180653.

[13] GeoWizard, ADONIS, versión 3.90. Documentación técnica: Main Features y Tutorials, [en línea]. Disponible en: https://www.geowizard.org/.

[14] Hoek, E., Carranza-Torres, C., y Corkum, B., Hoek–Brown failure criterion–2002 edition. Proceedings of the NARMS–TAC Conference, Toronto, Canadá, [online]. 1, pp. 267–273, 2002. Available at: https://www.rocscience.com/assets/resources/learning/hoek/Hoek-Brown-Failure-Criterion-2002.pdf. Consultado: 26 de octubre de 2026.

[15] Hoek, E., and Brown, E.T., The Hoek–Brown failure criterion and GSI–2018 edition. Journal of Rock Mechanics and Geotechnical Engineering, 11(3), pp. 445–463, 2019. DOI: https://doi.org/10.1016/j.jrmge.2018.08.001.

[16] Lv, X., Zhou, H., Wang, Z., and Cai, Y., Movement and failure law of slope and overlying strata during underground mining. Journal of Geophysics and Engineering, 15(4), pp. 1638–1650, 2018. DOI: https://doi.org/10.1088/1742-2140/aab8b2.

[17] Hoek, E., and Diederichs, M.S., Empirical estimation of rock mass modulus. International Journal of Rock Mechanics and Mining Sciences, 43(2), pp. 203–215, 2006. DOI: https://doi.org/10.1016/j.ijrmms.2005.06.005.

[18] Geuzaine, C., and Remacle, J.F., Gmsh: a 3-D finite element mesh generator with built-in pre- and post-processing facilities. International Journal for Numerical Methods in Engineering, 79(11), pp. 1309–1331, 2009. DOI: https://doi.org/10.1002/nme.2579.

[19] Hyndman, R.J., y Fan, Y., Sample quantiles in statistical packages. The American Statistician, 50(4), pp. 361–365, 1996. DOI: https://doi.org/10.1080/00031305.1996.10473566.

[20] Oberkampf, W.L., Trucano, T.G., y Hirsch, C., Verification, validation, and predictive capability in computational engineering and physics. Applied Mechanics Reviews, 57(5), pp. 345–384, 2004. DOI: https://doi.org/10.1115/1.1767847.

[21] Su, C., Li, P., Gong, P., y Liu, C., Multifactor analysis of roof deformation and reasonable determination of the unsupported distance of a coal roadway heading face based on response surface method. Energy Science & Engineering, 11(7), pp. 2395–2407, 2023. DOI: https://doi.org/10.1002/ese3.1461.

Dimensions

PlumX

Visitas a la página del resumen del artículo

39

Descargas

Los datos de descarga aún no están disponibles.

Cómo citar

Flórez-Esquivel, C. A. (2026). Agregación espacial e interpretación multiescala de resultados geomecánicos en una galería en carbón: estudio numérico sintético. Boletín De Ciencias De La Tierra, 93(60), 86-99. https://doi.org/10.15446/rbct.n60.129747