Método para Mejorar la Precisión de Seguimiento de un Filtro Activo de Potencia en Conexión Paralelo
Method to Improve the Current Tracking Accuracy of a Shunt Active Filter
Palabras clave:
Calidad de Energía Electríca, Filtros Activos de Potencia, Regulador de Corriente (es)un regulador de corriente para un filtro activo paralelo basado en
un convertidor PWM fuente de tensión. El regulador tiene dos niveles. El nivel externo genera las corrientes de referencia para el nivel interno. El nivel externo usa un algoritmo repetitivo en tiempo discreto para la compensación de las corrientes armónicas, un algoritmo para mantener constante la tension continua de los condensadores en el convertidor y un generador de la referencia para la potencia reactiva. El nivel interno utiliza una realimentación en variables de estado con acción integral para el control de la corriente. En este trabajo se justifica el uso de un regulador repetitivo para mejorar el seguimiento de las referencias requeridas por el filtro activo. Se estudia la estabilidad del sistema en lazo cerrado y se dan algunas indicaciones sobre la robustez del sistema. El regulador propuesto se ha probado en un prototipo de laboratorio con cargas no lineales equilibradas y desequilibradas.
This work presents the detailed design, analysis and application of a current regulator for a parallel active filter based on a converter PWM tension source. The regulator has two levels. The external level generates the reference currents for the internal level. The external level uses a repetitive algorithm in discreet time for the compensation of the current harmonics; an algorithm maintains constant the DC bus in the converter and a reference generator calculates the reactive power. The internal level uses a state variables feedback with integral action for the current control. In this work the use of a repetitive regulator is justified to improve the reference tracking required by the active power filter. The closed-loop stability of the system is studies and shows some indications about the robustness of the system. The proposed regulator has been tested in a laboratory prototype with balanced and unbalanced nonlinear loads.