Publicado

2023-05-25

Technology management. Design and manufacture of a heatsink

Gestión Tecnológica. Diseño y manufactura de un disipador de calor

DOI:

https://doi.org/10.15446/dyna.v90n226.104063

Palabras clave:

gestión; diseño; manufactura; disipador de calor; convención (es)
management; desing; manufacture; heatsink; convention (en)

Descargas

Autores/as

El objetivo principal de esta investigación es estudiar y analizar la gestión de la tecnología y la innovación a través de la fabricación de un disipador térmico para transistores de potencia IGBT que se adapten a un convertidor CD/CD. Este trabajo consta de cuatro etapas: planificación, diseño, modelado y fabricación. Se asume que la fabricación de un producto innovador requiere garantizar la satisfacción del cliente, ya que se definieron criterios funcionales (requisitos) como en disminuir la temperatura a menos de 50 ° C, la disipación de calor se realiza por convección natural o convección forzada. Criterios no funcionales, como fácil transporte con un peso inferior a 2,5 kg. dimensiones inferiores a 0,32 m de largo, 0,217 m de ancho y 0,09 cm de alto. Además, el material acondicionado es cobre o aluminio o el uso de ambos. Para lograrlo, se utilizó la metodología de Pugh.

The main purpose of this research is to study and analyze the management of technology and innovation through the manufacture of a heatsink is manufactured for IGBT power transistors to fit a CD/CD converter. This work consists of four stages: planning, design, modelling and manufacturing.  It is assumed that the manufacture of an innovative product requires guaranteeing customer satisfaction, like functional criteria (requirements) were defined like in decrease the temperature to less than 50 °C, heat dissipation is realised by natural convection or forced convection. Non-functional criteria, like easy transport with a weightless than 2.5 kg, dimensions less than 0.32 m long, 0.217 m wide and 0.09 cm high. Besides, the conditioned material is copper or aluminium or the use of both. To achieve this, Pugh's methodology was used.

Referencias

Harper, C.A., Electronic Packaging and Interconnection Handbook. 4th ed., McGraw-Hill, New York, 2005, pp. 50-61.

Bar-Cohen, A., Wang, P. and Rahim, E., Thermal Management of high heat flux nanoelectronic chips. Z-Tec Publishing, Bremen Microgravity Science and Technology, 19(3), pp. 48-52, 2007. DOI: https://doi.org/10.1007/BF02915748

Chitode, J.S., Industrial Electronics. 1st ed., India: Technical Publications, 2009, pp. 80-114.

Šprlák, R., Kalvar, D. and Chlebiš, P., Design of experimental liquid heat sink for high power electronic. 14th International Conference on Environment and Electrical Engineering, pp. 83-105, 2014. DOI: https://doi.org/10.1007/978-90-481-9029-4_5

Thome, J. and Consolini, L., Prediction of critical flux in microchannels. Microfluidics Based Microsystems: Fundamentals and applications, pp. 107-120, 2010. DOI: https://doi.org/10.1007/978-90-481-9029-4_6

Dang, T., Teng, J.T. and Chu, J.C., A study on the simulation and experiment of a microchannel counterflow. Applied Thermal Engineering, 30(14), pp. 2163-2172, 2010. DOI: https://doi.org/10.1016/j.applthermaleng.2010.05.029

Kosar, A., Effect of substrate thickness and material on heat transfer. International Journal of Thermal Sciences, 49(4), pp. 635-642, 2009. DOI: https://doi.org/10.1016/j.ijthermalsci.2009.11.004

Seal, S., Glover, M. and Mantooth, H.A., Design of a Reduced form factor passive heat sink for high power applications, IEEE International Workshop on Integrated Power Packaging (IWIPP), pp. 44-47, 2015. DOI: https://doi.org/10.1109/IWIPP.2015.7295974

Steiner, T. and Sittig, R., IGBT Module Setup with Integrated Micro-Heat Sinks. IEEE 12th International Symposium on Power Semiconductor Devices and ICs. Proceedings (Cat. No. 00CH37094), pp. 209-212, 2000. DOI: https://doi.org/10.1109/ISPSD.2000.856808

Holman, J.P., Heat transfer. 10th ed. McGraw-Hill, New York, 2009, pp. 190-215.

Christen, D., Member, S., Stojadinovic, M., Member, S. and Senior, J.B., Energy Efficient Heat Sink Design: Natural vs Forced Convection Cooling, IEEE Transactions on Power Electronics, 32(11), pp. 8693-8704, 2016. DOI: https://doi.org/10.1109/TPEL.2016.2640454

Han, M., Leet, S., Hong, C., Yang, C. and Kim, K., Development of water-cooled heat sink for high-power IGBT inverter, IEEE 7ª International Conference on Power Electronics, 2008, pp. 295-299. DOI: https://doi.org/10.1109/ICPE.2007.4692396

Robinson, A.J., A Thermal–Hydraulic Comparison of Liquid Microchannel and Impinging Liquid Jet Array Heat Sinks for High-Power Electronics Cooling, IEEE Transactions on Components and Packaging Technologies, 32(2), pp. 347-357, 2009. DOI: https://doi.org/10.1109/TCAPT.2008.2010408

Gillot, C., Meysenc, L., Schaeffer, C. and Bricard, A., Integrated single and two-phase micro heat sinks under IGBT chips, IEEE Transactions on Components and Packaging Technologies, 22(3), 1999. DOI: https://doi.org/10.1109/6144.796540

Marinov, A. and Georgiev, A., Modelling, Analysis and comparison of heat sink designs with improved natural convection, in: IEEE 19th International Symposium on Electrical Apparatus and Technologies (SIELA), 2016, pp. 1-4, DOI: https://doi.org/10.1109/SIELA.2016.7543023

Zainolarifin, M., Hanafi, M., Ismail, F.S. and Rosli, R., Radial plate fins heat sink model design and optimization, in: IEEE 10th Asian Control Conference (ASCC), 2015, pp 1-5. DOI: https://doi.org/10.1109/ASCC.2015.7244448

Asimakopoulos, P., Papastergiou, K., Thiringer, T. and Bongiorno, M., Heat sink design considerations in medium power electronic applications with long power cycles, in: IEEE 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe), 2015, pp. 1-9. DOI: https://doi.org/10.1109/EPE.2015.7309150

Welker, T. and Müller, J., Design, simulation and fabrication of liquid cooled LTCC devices utilizing integrated channels, IN: 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2016, pp. 830-385. DOI: https://doi.org/10.1109/ITHERM.2016.7517632

Manivannan, S., Prasanna, S., Arumugam, R. and Sudharsan, N.M., Multi-objective optimization of flat plate heat sink. International Journal of Advanced Manufacturing Technolgy, 52, pp. 739-749, 2010. DOI: https://doi.org/10.1007/s00170-010-2754-8

Popovic, J., Milanovic, M., Dolinar, D. and Klopcic, B., Thermal analysis of the half-bridge IGBT power module with analytical, numerical and experimental methods. Przeglad Electrotechniczny (Electrical Review), 87(3), pp.145-148, 2011.

Pugh, S., Total design: integrated methods for successful product engineering. 1st ed., Addison Wesley, E.U., 1991, pp. 20-25.

Palafox, G.I., Design and manufacturing of a heat sink for IGBT power transistors. Thesis MSc, Technological University of the Mixteca, Huajuapan de León, Oax., Mexico, 2017, pp. 10-60.

Bergman, T., Lavine, A., Incropera, F. and DeWitt, D., Fundamentals of heat and mass transfer. 7th ed., Wiley, E.U., 2011, pp. 30-32.

Groover, M., Fundamentals of Modern Manufacturing: Materials, Processes, and Systems. 5th ed., Mc Graw-Hill, E.U., 2012, pp. 30-32.

Kalpakjian, S. and Schmid, S.R., Manufacturing Engineering and Technology. 7th ed., Prentice Hall, E.U., 2014, pp. 57-59.

Cómo citar

IEEE

[1]
S. Montesinos-González, C. Vázquez-Cid-de León, J. E. Domínguez-Herrera, y G. I. Palafox-Alvarado, «Technology management. Design and manufacture of a heatsink », DYNA, vol. 90, n.º 226, pp. 9–16, may 2023.

ACM

[1]
Montesinos-González, S., Vázquez-Cid-de León, C., Domínguez-Herrera, J.E. y Palafox-Alvarado, G.I. 2023. Technology management. Design and manufacture of a heatsink . DYNA. 90, 226 (may 2023), 9–16. DOI:https://doi.org/10.15446/dyna.v90n226.104063.

ACS

(1)
Montesinos-González, S.; Vázquez-Cid-de León, C.; Domínguez-Herrera, J. E.; Palafox-Alvarado, G. I. Technology management. Design and manufacture of a heatsink . DYNA 2023, 90, 9-16.

APA

Montesinos-González, S., Vázquez-Cid-de León, C., Domínguez-Herrera, J. E. & Palafox-Alvarado, G. I. (2023). Technology management. Design and manufacture of a heatsink . DYNA, 90(226), 9–16. https://doi.org/10.15446/dyna.v90n226.104063

ABNT

MONTESINOS-GONZÁLEZ, S.; VÁZQUEZ-CID-DE LEÓN, C.; DOMÍNGUEZ-HERRERA, J. E.; PALAFOX-ALVARADO, G. I. Technology management. Design and manufacture of a heatsink . DYNA, [S. l.], v. 90, n. 226, p. 9–16, 2023. DOI: 10.15446/dyna.v90n226.104063. Disponível em: https://revistas.unal.edu.co/index.php/dyna/article/view/104063. Acesso em: 20 mar. 2026.

Chicago

Montesinos-González, Salvador, Carlos Vázquez-Cid-de León, José Ernesto Domínguez-Herrera, y Gerardo Israel Palafox-Alvarado. 2023. «Technology management. Design and manufacture of a heatsink ». DYNA 90 (226):9-16. https://doi.org/10.15446/dyna.v90n226.104063.

Harvard

Montesinos-González, S., Vázquez-Cid-de León, C., Domínguez-Herrera, J. E. y Palafox-Alvarado, G. I. (2023) «Technology management. Design and manufacture of a heatsink », DYNA, 90(226), pp. 9–16. doi: 10.15446/dyna.v90n226.104063.

MLA

Montesinos-González, S., C. Vázquez-Cid-de León, J. E. Domínguez-Herrera, y G. I. Palafox-Alvarado. «Technology management. Design and manufacture of a heatsink ». DYNA, vol. 90, n.º 226, mayo de 2023, pp. 9-16, doi:10.15446/dyna.v90n226.104063.

Turabian

Montesinos-González, Salvador, Carlos Vázquez-Cid-de León, José Ernesto Domínguez-Herrera, y Gerardo Israel Palafox-Alvarado. «Technology management. Design and manufacture of a heatsink ». DYNA 90, no. 226 (mayo 25, 2023): 9–16. Accedido marzo 20, 2026. https://revistas.unal.edu.co/index.php/dyna/article/view/104063.

Vancouver

1.
Montesinos-González S, Vázquez-Cid-de León C, Domínguez-Herrera JE, Palafox-Alvarado GI. Technology management. Design and manufacture of a heatsink . DYNA [Internet]. 25 de mayo de 2023 [citado 20 de marzo de 2026];90(226):9-16. Disponible en: https://revistas.unal.edu.co/index.php/dyna/article/view/104063

Descargar cita

CrossRef Cited-by

CrossRef citations1

1. Rosa F. Fuentes-Morales, Arturo Díaz-Ponce, Edgar D. Acosta-Pérez, Fernando Martell-Chavez, Manuel I. Peña-Cruz, Pedro M. Rodrigo. (2024). Design, development, and electrical characterization of a parabolic dish photovoltaic thermal concentration system. Journal of Renewable and Sustainable Energy, 16(6) https://doi.org/10.1063/5.0234029.

Dimensions

PlumX

Visitas a la página del resumen del artículo

695

Descargas

Los datos de descargas todavía no están disponibles.

Licencia

Derechos de autor 2023 DYNA

Creative Commons License

Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-SinDerivadas 4.0.

El autor o autores de un artículo aceptado para publicación en cualquiera de las revistas editadas por la facultad de Minas cederán la totalidad de los derechos patrimoniales a la Universidad Nacional de Colombia de manera gratuita, dentro de los cuáles se incluyen: el derecho a editar, publicar, reproducir y distribuir tanto en medios impresos como digitales, además de incluir en artículo en índices internacionales y/o bases de datos, de igual manera, se faculta a la editorial para utilizar las imágenes, tablas y/o cualquier material gráfico presentado en el artículo para el diseño de carátulas o posters de la misma revista.