Publicado

2014-03-01

Ionic liquids (IL) corrosion on A285 carbon steel

DOI:

https://doi.org/10.15446/dyna.v81n184.39512

Palabras clave:

Ionic liquids, corrosion, Grade A - A285 carbon steel. (es)

Descargas

Autores/as

  • Rogério F. Dos Santos LAPEC - UFRGS
  • Tiago Falcade LAPEC - UFRGS
  • Leonardo M. Antonini LAPEC - UFRGS
  • María R. Ortega-V. LAPEC - UFRGS
  • Silvana Mattedi UFBA
  • Miguel Iglesias UFBA
  • Célia F. Malfatti LAPEC - UFRGS
In this work, corrosion caused by different ionic liquids on Grade A – A285 carbon steel plates at room temperature (25°C) is studied. Ionic liquids were prepared via acid – base neutralization. The ionic liquid hydrophilic or hydrophobic character was determined by the wettability technique. Corrosion behavior for each system was analyzed by electrochemical measurements (open circuit potential monitoring and potentiodynamic polarization). Substrate morphology was analyzed by scanning electron microscope and energy dispersive X-ray spectroscopy before and after the electrochemical measurements. The results obtained showed that Grade A – A285 carbon steel in contact with the ionic liquids presented low corrosion rates, being the highest one the corresponding for the 2- hydroxyethylamominum lactate system and the lowest corrosion rate for 2-hydroxyethylammonium acetate system.

Dimensions

PlumX

Visitas a la página del resumen del artículo

488

Descargas

Los datos de descarga aún no están disponibles.

Cómo citar

[1]
R. F. Dos Santos, «Ionic liquids (IL) corrosion on A285 carbon steel», DYNA, vol. 81, n.º 184, pp. 122–128, mar. 2014, doi: 10.15446/dyna.v81n184.39512.