A review to refrigeration with thermoelectric energy based on the Peltier effect
Una revisión a la refrigeración con energía termoeléctrica basada en el efecto Peltier
DOI:
https://doi.org/10.15446/dyna.v86n208.72589Palabras clave:
thermoelectric energy, refrigeration, Peltier effect, Peltier cell. (en)energía termoeléctrica, refrigeración, efecto Peltier, celda Peltier (es)
Descargas
Currently, energy demand and environmental pollution have boosted the evolution of different environment friendly technologies for the development of clean and renewable energies. That is why scientific research allows us to demonstrate the use of solid state based devices implementing temperature changes by electric induction. Given the above, a combined thermic generation system is taken into consideration, consisting in an environmentally friendly thermoelectric generator and refrigerator, wich is fueled and controlled by an electric fluid. Therefore, this study gives an approch and mathematic demonstrations to the concepts of greater relevance about the thermoelectric device and the effects of greater incidence, responsible for giving advantageous characteristics to the implementation of Peltier cells as a basic device in a cooling system for smaller applications, maintaining an ecological system, clean and without detrimental effects to the ozone layer, since there is no C02 emissions into the atmosphere.
En la actualidad la demanda de energía y la contaminación ambiental conlleva a la conciencia de la evolución de distintas tecnologías amigables con el medio ambiente para el desarrollo de energías limpias y renovables, es por esto que la investigación científica nos permite demostrar el uso de dispositivos basados en estado sólido para la implementación de cambios de temperatura basados a partir de inducción de electricidad. Dado lo anterior es considerado un sistema de generación térmico combinado, el cual consiste en un generador termoeléctrico y refrigerador, lo cual es amigable con el medio ambiente siendo alimentado y controlado por fluido eléctrico. Por ende, el siguiente estudio da un acercamiento y demostraciones matemáticas a los conceptos de mayor relevancia sobre el dispositivo termoeléctrico y los efectos de mayor incidencia que son responsables de dar características ventajosas a la implementación de celdas de Peltier como dispositivo base para un sistema de enfriamiento en aplicaciones en tamaño reducido, manteniendo un sistema ecológico, limpio y sin efectos de degradantes a la capa de ozono por la emisión de C02 en la atmosfera.
Referencias
Ožbolt, M., Kitanovski, A., Tušek, J. and Poredoš, A. Electrocaloric refrigeration: thermodynamics, state of the art and future perspectives. International Journal of Refrigeration, 40, pp. 174-188, 2014. DOI: 10.1016/j.ijrefrig.2013.11.007
Hermes, C.J. and Barbosa, J.R., Thermodynamic comparison of Peltier, Stirling, and vapor compression portable coolers. Applied Energy, 91(1), pp. 51-58, 2012. DOI: 10.1016/j.apenergy.2011.08.043
Uchida, K.I., Adachi, H., Kikkawa, T., Kirihara, A., Ishida, M., Yorozu, S., Maekawa, S. and Saitoh, E., Thermoelectric generation based on spin Seebeck effects. Proceedings of the IEEE, 104(10), pp. 1946-1973, 2016. DOI: 10.1109/JPROC.2016.2535167
Boukai, A.I., Bunimovich, Y., Tahir-Kheli, J., Yu, J.K., Goddard III, W.A. and Heath, J.R., Silicon nanowires as efficient thermoelectric materials. Nature, 451(7175), pp. 168-171, 2008. DOI: 10.1038/nature06458
Jakhar, N., Baheti, N., Gurjar, M.C. and Sharma, P., Model development of refrigerator and heater based on Peltier module and Fresnel lens. In International Conference on Recent Advances and Innovations in Engineering (ICRAIE). Jaipur, India, IEEE, 2016, pp. 1-4. DOI: 10.1109/ICRAIE.2016.7939500
Peltier, J.C., Nouvelles expériences sur la caloricité des courants électrique. Annales de Chimie et de Physique (in French), [online]. 56, pp. 371-386, 1834. Available at: https://books.google.com.co/books?id=1Jc5AAAAcAAJ&pg=PA371&redir_esc=y#v=onepage&q&f=false
Dell, E.J., Capozzi, B., Xia, J., Venkataraman, L. and Campos, L.M., Molecular length dictates the nature of charge carriers in single-molecule junctions of oxidized oligothiophenes. Nature Chemistry, 7(3), pp. 209-214, 2015. DOI: 10.1038/nchem.2160
Nonoguchi, Y., Ohashi, K., Kanazawa, R., Ashiba, K., Hata, K., Nakagawa, T. and Kawai, T., Systematic conversion of single walled carbon nanotubes into n-type thermoelectric materials by molecular dopants. Scientific Reports, 3(1), pp. 1-7. DOI: 10.1038/srep03344
Astrain, D., Vián, J.G. and Albizua, J., Computational model for refrigerators based on Peltier effect application. Applied Thermal Engineering, 25(17), pp. 3149-3162, 2005. DOI: 10.1016/j.applthermaleng.2005.04.003
Lan, Y. and Ren, Z., Thermoelectric nanocomposites for thermal energy conversion. In Nanomaterials for Sustainable Energy. Springer International Publishing, 2016, pp. 371-443. DOI: 10.1007/978-3-319-32023-6_11
Zhao, D. and Tan, G., A review of thermoelectric cooling: materials, modeling and applications. Applied Thermal Engineering, 66(1), pp. 15-24, 2014. DOI: 10.1016/j.applthermaleng.2014.01.074
Manterola, C,. Astudillo, P., Arias, E. and Claros, N., ‘Systematic reviews of the literature: what should be known about them, Cirugía Española, 91(3), pp. 149-155, 2013. DOI: 10.1016/j.ciresp.2011.07.009.
García-Pérez, L. et al., ‘Systematic review of health-related utilities in Spain: the case of mental health, Gaceta Sanitaria,. 28(1), pp. 77-83, 2013. DOI: 10.1016/j.gaceta.2013.04.006.
Merlano-Porras, C.A. and Gorbanev, L., ‘Health system in Colombia: a systematic review of literature. Revista Gerencia Políticas Salud, 12(24), pp. 74-86, 2013.
Kitchenham, B., Brereton, O.P., Budgen, D., Turner, M., Bailey, J. and Linkman, S., Systematic literature reviews in software engineering —A systematic literature review, Inf. Softw. Technol., 51(1), pp. 7-15, 2008. DOI: 10.1016/j.infsof.2008.09.009
De-La-Hoz-Franco, E., Ariza-Colpas, P., Quero, J.M. and Espinilla, M., Sensor-based datasets for human activity recognition – A systematic review of literature, in IEEE Access, 6, pp. 59192-59210, 2018. DOI: 10.1109/ACCESS.2018.2873502.
Elsevier. Science, health and medical journals, full text articles and books, 2017 [Accessed August 29, 2017]. Available from: http://www.sciencedirect.com/
Yilbas, B.S. and Sahin, A.Z., Thermal characteristics of combined thermoelectric generator and refrigeration cycle. Energy Conversion and Management, 83, pp. 42-47, 2014. DOI: 10.1016/j.enconman.2014.02.067
Lineykin, S. and Ben-Yaakov, S., Modeling and analysis of thermoelectric modules. IEEE Transactions on Industry Applications, 43(2), pp. 505-512, 2007. DOI: 10.1109/TIA.2006.889813
Julio-Betancourt, G.A. and Hooton, R.D., Study of the Joule effect on rapid chloride permeability values and evaluation of related electrical properties of concretes. Cement and Concrete Research, 34(6), pp. 1007-1015, 2004. DOI: 10.1016/j.cemconres.2003.11.012
Kehlberger, A., Ritzmann, U., Hinzke, D., Guo, E.J., Cramer, J., Jakob, G. and Hillebrands, B., Length scale of the spin Seebeck effect. Physical Review Letters, 115(9), pp. 1-5, 2015. DOI: 10.1103/PhysRevLett.115.096602
Herranz-Pindado, R., Climatización mediante células Peltier. Tesis, Escuela Técnica Superior de Ingeniería, Universidad Pontificia Comillas, España, [en líena]. 2008, 237 P. Disponible en: http://docplayer.es/50941461-Climatizacion-mediante-celulas-peltier.html
Sandoval, A.P., Espinosa, E. and Barahona, J.L., Celdas Peltier: una alternativa para sistemas de enfriamiento con base en semiconductor. 11° Foro Estatal de Investigacion Cientifica y Tecnologica, 2008, pp. 158-161.
Das, S.K., Putra, N., Thiesen, P. and Roetzel, W., Temperature dependence of thermal conductivity enhancement for nanofluids. Journal of Heat Transfer, 125(4), pp. 567-574, 2003. DOI: 10.1115/1.1571080
Xu, Y., Gan, Z. and Zhang, S.C., Enhanced thermoelectric performance and anomalous Seebeck effects in topological insulators. Physical Review Letters, 112(22), pp. 1-5, 2014. DOI: 10.1103/PhysRevLett.112.226801
Bulusu, A. and Walker, D. G. Review of electronic transport models for thermoelectric materials. Superlattices and Microstructures, 44 (1), pp. 1-36, 2008. DOI: 10.1016/j.spmi.2008.02.008
Block, H. and Walker, S.M., A modification of the onsager theory for a dielectric. Chemical Physics Letters, 19(3), pp. 363-364, 1973. DOI:10.1016/0009-2614(73)80380-X [28] Ohnuma, Y., Matsuo, M. and Maekawa, S., Theory of spin Peltier effect. Physical Review B, 96(13), pp. 1-4, 2017. DOI: 10.1103/PhysRevB.96.134412
Meca-Meca, F. y Jiménez-Calvo, J., Horno-nevera basado en células Peltier para el ensayo térmico de dispositivos electrónicos. España, Escuela Politécnica Universidad de Alcalá, [en línea]. 2004, 10 P. Disponible en: http://e-spacio.uned.es/fez/eserv/taee:congreso-2004-1139/SP108.pdf
Patterson, G. and Sobral, M., Efecto Peltier. Argentina, Universidad de Buenos Aires, Departamento de Física FCEyN, [en línea]. 2007, 4 P. Disponible en: http://materias.df.uba.ar/labo4aa2014c1/files/2012/07/Efecto-Peltier.pdf
Chen, J., Yan, Z. and Wu, L., The influence of Thomson effect on the maximum power output and maximum efficiency of a thermoelectric generator. Journal of Applied Physics, 79(11), pp. 8823-8828, 1996. DOI: 10.1063/1.362507
Mannella, G.A., La Carrubba, V. and Brucato, V., Peltier cells as temperature control elements: experimental characterization and modeling. Applied Thermal Engineering, 63(1), pp. 234-245, 2014. DOI: 10.1016/j.applthermaleng.2013.10.069
Elsheikh, M.H., Shnawah, D.A., Sabri, M.F.M., Said, S.B.M., Hassan, M.H., Bashir, M.B.A. and Mohamad, M., A review on thermoelectric renewable energy: principle parameters that affect their performance. Renewable and Sustainable Energy Reviews, 30, pp. 337-355, 2014. DOI: 10.1016/j.rser.2013.10.027
Snyder, G.J. and Ursell, T.S., Thermoelectric efficiency and compatibility. Physical Review Letters, 91(14), pp. 1-4, 2003. DOI: 10.1103/PhysRevLett.91.148301
Cómo citar
IEEE
ACM
ACS
APA
ABNT
Chicago
Harvard
MLA
Turabian
Vancouver
Descargar cita
CrossRef Cited-by
1. Abdelaaziz Boulgheb, Maya Lakhdara, Saida Latreche. (2021). Improvement of the Self-Heating Performance of an Advanced SiGe HBT Transistor Through the Peltier Effect. IEEE Transactions on Electron Devices, 68(2), p.479. https://doi.org/10.1109/TED.2020.3044869.
2. Qixing Zhang, Yudong Wang, Xu Xiao, Juxin Zhang, Wenjie Zhang, Meiling Liu, Beihai Huang, Bo Xu, Chao Yu, Chong Wang, Qingyuan Wang. (2024). Improved elastocaloric effect of NiTi shape memory alloys strengthened by Ni4Ti3 nanoprecipitates. Acta Materialia, 281, p.120442. https://doi.org/10.1016/j.actamat.2024.120442.
3. Alberto Battistel, Pekka Peljo. (2021). Recent trends in thermoelectrochemical cells and thermally regenerative batteries. Current Opinion in Electrochemistry, 30, p.100853. https://doi.org/10.1016/j.coelec.2021.100853.
4. Hagen Kellermann, Samuel Fuhrmann, Mirko Hornung. (2021). Design of a Battery Cooling System for Hybrid Electric Aircraft. AIAA AVIATION 2021 FORUM. https://doi.org/10.2514/6.2021-3138.
5. Pinar Mert Cuce. (2024). Design and experimental investigation of a thermoelectric vaccine cabinet integrated with photovoltaic and nanofluids. Journal of Thermal Analysis and Calorimetry, 149(17), p.9955. https://doi.org/10.1007/s10973-024-13433-9.
6. Andres Felipe Solis Pino, Ginna Andrea Ramirez Palechor, Luis Fernando Alape Realpe. (2021). Propuesta de un dispositivo refrigerante con celdas Peltier alimentado con un sistema fotovoltaico independiente: un caso de estudio. Ingeniería y Ciencia, 17(33), p.151. https://doi.org/10.17230/ingciencia.17.33.7.
7. Jorge Luis Barahona-Avalos, José Antonio Juárez-Abad, G. S. Galván-Cruz, Jesús Linares-Flores. (2021). Control mediante rechazo activo de perturbaciones de la temperatura de un módulo termoeléctrico. Revista Iberoamericana de Automática e Informática industrial, 19(1), p.48. https://doi.org/10.4995/riai.2021.14728.
8. H. Correa, R. Pineda S., D. Peña Lara. (2023). Furnace for scientific research with temperature control using Peltier cells and a gas heat transference system: Design and building. Applied Thermal Engineering, 220, p.119700. https://doi.org/10.1016/j.applthermaleng.2022.119700.
9. Bhushan Hirudkar, Prajwal Yesansure, Mayur Maurya, Vihang Chaudhary, Jayshri Tagde, Yugal Bhaisare. (2021). Fabrication of Instant Water Cooler Using Thermoelectric Module. International Journal of Advanced Research in Science, Communication and Technology, , p.1130. https://doi.org/10.48175/IJARSCT-1540.
10. Carlos Armenta-Déu. (2025). Phase change material thermoelectric generator. Heat and Mass Transfer, 61(5) https://doi.org/10.1007/s00231-025-03551-x.
11. Yi Tang, Xiang Niu, Yuleng Jiang, Junxi Cao, Junying Lai, Houzhu He, Jianpeng Chen, Xiaodong Jian, Sheng-Guo Lu. (2025). BaTiO3-Based Electrocaloric Materials—Recent Progresses and Perspective. Materials, 18(17), p.4190. https://doi.org/10.3390/ma18174190.
12. Busra Gultekin Subasi, Esra Capanoglu. (2024). Low-Temperature Processing of Food Products. , p.53. https://doi.org/10.1016/B978-0-12-818733-3.00001-1.
13. Juan Javier Montesinos-Garcia, Jorge Luis Barahona-Avalos, Yoswaldo Gomez Cabrera, Jesus Linares-Flores, Jose Antonio Juarez-Abad. (2022). Modeling and Control for a Class of Non-linear Systems With Non-affine Polynomial Control Input. 2022 19th International Conference on Electrical Engineering, Computing Science and Automatic Control (CCE). , p.1. https://doi.org/10.1109/CCE56709.2022.9975993.
14. Salvador Benitez-Villasana, Ramón Hernández-Sánchez. (2019). Caracterización de Celdas Peltier para Acondicionamiento del Aire. Revista de Ingeniería Tecnológica, , p.1. https://doi.org/10.35429/JTEN.2019.10.3.1.5.
Dimensions
PlumX
Visitas a la página del resumen del artículo
Descargas
Licencia
Derechos de autor 2019 DYNA

Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-SinDerivadas 4.0.
El autor o autores de un artículo aceptado para publicación en cualquiera de las revistas editadas por la facultad de Minas cederán la totalidad de los derechos patrimoniales a la Universidad Nacional de Colombia de manera gratuita, dentro de los cuáles se incluyen: el derecho a editar, publicar, reproducir y distribuir tanto en medios impresos como digitales, además de incluir en artículo en índices internacionales y/o bases de datos, de igual manera, se faculta a la editorial para utilizar las imágenes, tablas y/o cualquier material gráfico presentado en el artículo para el diseño de carátulas o posters de la misma revista.




