DYNA

European Aggregates Association. Estimates of aggregates production 2016. Statistics Database. [online]. 2016. Available at: https://uepg.eu/statistics/estimates-of-production-data/data-2016.

Haddad, L.D., Neves, R.R., de Oliveira, P.V., dos Santos, W.J. et al., Influence of particle shape and size distribution on coating mortar properties. Journal of Materials Research and Technology, 9(4), pp. 9299-9314, 2020. DOI: 10.1016/j.jmrt.2020.06.068

Figmig, R. and Kovac, M., The influence of aggregate gradation on the fresh and hardened concrete properties. IOP Conference Series: Materials Science and Engineering, 566, art. 012007, 2019. DOI: 10.1088/1757-899X/566/1/012007

Nanthagopalan, P. and Santhanam, M., Fresh and hardened properties of self-compacting concrete produced with manufactured sand. Cement and Concrete Composites, 33(3), pp. 353-358, 2011. DOI: 10.1016/j.cemconcomp.2010.11.005

Estephane, P., Garboczi, E,J., Bullar, J.W. and Wallevic, O.H., Three-dimensional shape characterization of fine sands and the influence of particle shape on the packing and workability of mortars, Cement and Concrete Composites, 97, pp. 125-142, 2019. DOI: 10.1016/j.cemconcomp.2018.12.018

Mehta, K.P. y Monteiro, P.J.M., Concreto, estructura, propiedades y materiales. Instituto Mexicano del Cemento y del Concreto, A.C. Mexico, 1998.

Prasetia, I. and Maulana, A., Effects of crushed stone waste as fine aggregate on mortar and concrete properties. IOP Conference Series: Materials Science and Engineering, 620, art. 012040, 2019. DOI: 10.1088/1757-899X/620/1/012040

Lyu, K., Garboczi, E.J., Shei, W. and Miao, C., The effect of rough vs. Smooth aggregate surfaces on the characteristics of the interfacial transition zone. Cement and Concrete Composites, 99, pp. 49-61, 2019. DOI: 10.1016/j.cemconcomp.2019.03.001

Güçlüer, K., Investigation of the effects of aggregate textural properties on compressive strength (CS) and ultrasonic pulse velocity (UPV) of concrete. Journal of Building Engineering, 27, art. 100949, 2019. DOI: 10.1016/j.jobe.2019.100949

Jin, C., Zu, F., Yang, X., Liu, K., Liu, P. et al., Three-dimensional quantification and classification approach for angularity and surface texture based on surface triangulation of reconstructed aggregates. Construction and Building Materials, 246, art. 118120, 2020. DOI: 10.1016/j.conbuildmat.2020.118120

Maroof, M.A., Mahboubi, A., Noorzad, A. and Safi, Y., A new approach to particle shape classification of granular materials. Transportation Geotechnics, 22, art. 100296, 2020. DOI: 10.1016/j.trgeo.2019.100296

Reddy, J.K.R. and Das, A., Shape characterisation of aggregates in three dimensions. European Journal of Environmental and Civil Enginerring, 2019. DOI: 10.1080/19648189.2019.1662329

Gudimettla, J., Myers, L. and Paugh, C., AIMS: The future in rapid, automated aggregate shape and texture measurement. Proceedings of Fifty-First Annual Conference of the Canadian Technical Asphalt Association (CTAA), 2006, pp. 179-207.

ASTM C 1252. Standard test method for uncompacted void content of fine aggregate (as influenced by particle shape, surface texture, and grading). ASTM international, 2006.

Zheng, J., Sun, Q., Zheng, H., Wei, D., Li, Z. et al., Three-dimensional particle shape characterizations from half particle geometries. Powder Technology, 367, pp. 122-132, 2020. DOI: 10.1016/j.powtec.2020.03.046

ASTM D 3398. Standard test method for Index of aggregates shape and texture. ASTM International, 2006.

Bascoy, D.A., Tecnología del hormigón fresco. Asociación Argentina de Tecnología del Hormigón (AATH). Editorial Biblos, Argentina, 1992.

Santillán, L.R., Sosa, M.E., Zega, C.J., Villagrán-Zaccardi, Y.A. y Chirillano, A., Influencia del agregado reciclado y otros agregados de trituración en la contracción por secado de morteros. Proceedings of 20ª Reunión Técnica de la AATH, 2014, pp. 546-556.

Cortes, D.D., Kim, H.K., Palomino, A.M. and Santamarina, J.C., Rheological and mechanical properties of mortars prepared with natural and manufactured sand. Cement and Concrete Research, 38, pp. 1142-1147, 2008. DOI: 10.1016/j.cemconres.2008.03.020.

ASTM 4253. Standard test methods for maximum index density and unit weight of soils using a vibratory table. ASTM International, 2016.

Cabrera, O.A., Traversa, L.P. and Ortega, N.F., Flowability in crushed sand mortar. Materiales de Construcción, 60(300), pp. 115-130, 2010. DOI: 10.3989/mc.2010.50909.

Jarvenpaa, H., Quality characteristics of fine aggregates and controlling their effects on concrete. PhD Thesis, Helsinki University of Technology, Espoo, Finlandia, 2001.

Shilstone, J.M and Shilstone J.M. jr., Performance-Based concrete mixtures and specifications for today. Concrete International, 24(2), pp. 80-83, 2002.

CIRSOC 201. Reglamento Argentino de estructuras de hormigón. Instituto Nacional de Tecnología Industrial, 2005.

Neville, A.M., Tecnología del concreto. Instituto Mexicano del Cemento y del Concreto, A.C. Mexico, 1980.

Donza, H., Cabrera, O. and Irassar, F., High-Strength concrete with different fine aggregate. Cement and Concrete research, 32, pp. 1755-1761, 2002. DOI: 10.1016/S0008-8846(02)00860-8

Westerholm, M., Lagerblad, B., Silfwerbrand, J. and Forsseberg, E., Influence of fine aggregate characteristics on the rheological properties of mortars. Cement and Concrete Composite, 30, pp. 274-828, 2008. DOI: 10.1016/j.cemconcomp.2007.08.008.

ACI 211. Standard practice for selecting proportions for normal, heavyweight and mass concrete, Reported by ACI committee. Detroit, USA, 2002.

Dosificación de Hormigones. Método ICPA para dosificación de hormigones. Instituto del Cemento Portland Argentino. [en línea]. Disponible en: htpp://www.icpa.org.ar.

Bolomey, J., Durcissement des mortiers et bétons. Bulletin Technique. Suisse Romande, 53, pp. 263-268, 1927. DOI: 10.5169/seals 41069.

Janoo, V.C., Quantification of shape, angularity, and surface texture of base course materials. U.S. Army Cold Regions Research and Engineering Laboratory, [online]. 1998, 28 P. Available at: http://www.dtic.mil.

Shergold, F.A., A review of available information on the significance of road stone tests. Road Research Technical Paper, 1948, 21 P.

Kosmatska, S.H., Kerkhoff, B. and Panarese, W.C., Design and control of concrete mixtures, Fourteenth ed. Portland Cement Association, Los Angeles, USA, 1988.

Johnston, C.D., Influence of aggregates void condition and particle size on the workability and water requirement of single sized aggregate-paste mixture. Properties of Fresh Concrete. Proceedings of of the RILEM Colloquium, 1990, pp. 67-76.

de Larrad, F. and Sedran, T., Optimization of ultra-high-performance concrete by the use of a paking model. Cement and Concrete research, 24(6), pp. 997-1009, 1994. DOI: 10.1016/0008-8846(94)90022-1.

NCH 2257/3. Morteros - Determinación de la consistencia- Parte3: Método del asentamiento del cono. Instituto Nacional de Normalización. Chile 1996.

ASTM C1437. Standard test method for flow of hydraulic cement mortar. ASTM International, 2015.