Correo Electrónico
DNINFOA - SIA
Bibliotecas
Convocatorias
Identidad U.N.
Publicado
Estudio del efecto de la distorsión armónica de tensión sobre la operación del motor trifásico de inducción en estado estacionario
Palabras clave:
armónicos de tensión, circuito equivalente, desclasificación de la potencia, eficiencia, factor de potencia, motor de inducción (es)Descargas
Referencias
Arora, T. G., Aware, M. V. y Tutakne, D. R., "Effect of pulse width modulated voltage on induction motor insulation," 7th IEEE Conference on Industrial Electronics and Applications (ICIEA), 2012, p.2044,2048, 18-20 Julio de 2012.
Bassi, C.; Filippo, M.; Giulivo, D.; Tessarolo, A., "Experimental assessment of medium-voltage Induction motor performance under multilevel PWM inverter supply," 2012 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), p.253,258, 20-22 Junio 2012.
Boglietti, A.; Cavagnino, A.; Ionel, D.M.; Popescu, M.; Staton, D.A.; Vaschetto, S., "A General Model to Predict the Iron Losses in PWM Inverter-Fed Induction Motors," IEEE Transactions on Industry Applications, vol.46, no.5, p.1882,1890, Sept.-Oct. 2010.
Chalmers, B. J. y Sarkar, B. R. “Induction-motor losses due to nonsinusoidal supply waveforms”, Proceedings of the Institution of Electrical Engineers IEE, vol. 115, No. 12, 1968, p 1777-1782.
Cochran, P. L. “Polyphase Induction Motors. Analysis, Design, and Application”. Nueva York: Marcel Dekker, INC., 1989, p 33-96.
Honsinger, V. B. “Induction motors operating from inverters”, En IEEE Industry Applications Society 1980 Annual Meeting, p 1276-1285.
Hossam, A. y Hasan, R. M. “Study of the effect of harmonics on measurements of the energy meters”, En: Power Systems Conference, 2006. MEPCON 2006. Eleventh International Middle East, 2006, vol. 2, p. 547-550.
IEEE. “IEEE Standard Test Procedure for Polyphase Induction Motors and Generators”, IEEE Standard 112-2004, 2004.
International Electrotechnical Commission IEC. “Rotating Electrical Machines. Part 2-1: Standard methods for determining losses and efficiency from tests”. IEC 60034-2-1. IEC, 2007, p 38-60.
Klingshirn, E. A. y Jordan, H. E. “Polyphase Induction Motor Performance and Losses on Nonsinusoidal Voltage Sources”. IEEE Transactions on Power Apparatus and Systems. Vol. 87, no.3, 1968, p 624-631.
Mistry, R. V., Finley, W. R., Kreitzer, S. y Hashish, E. “An induction motor — Keep it running”. 57th Industry Applications Society 57th Annual Petroleum and Chemical Industry Conference PCIC, 2010, p 1-12.
Murphy, J. M. y Honsinger, V. B. “Efficiency optimization of inverter-fed induction motor drives”, in 13th Annual IEEE Power Electronics Specialists Conference. 1982, p 544–552.
Papazacharopoulos, Z., Tatis, K., Kladas, A. y Manias, S. “Dynamic induction motor model for non-sinusoidal supply”, IEEE 33rd Annual Power Electronics Specialists Conference, Vol. 2, 2002, p 845-850.
Pedra, L. Sainz, F. Córcoles. Harmonic modeling of induction motors. Electric Power Systems Research, Volume 76, Issue 11, Julio 2006, p 936-944
Phumiphak, P. y Chat-uthai, C. "Nonintrusive method for estimating field efficiency of inverter-fed induction motor using measured values," IEEE International Conference on Sustainable Energy Technologies, 2008. ICSET 2008, p 580-583, 24-27 Nov. 2008.
Quispe, E. C. “Efectos del desequilibrio de tensiones sobre la operación del motor de inducción trifásico. Énfasis en la caracterización del desequilibrio de tensiones y el efecto sobre la potencia nominal”. Tesis de Doctorado en Ingeniería Eléctrica. Cali: Universidad del Valle. Facultad de Ingeniería. Escuela de Ingeniería Eléctrica y Electrónica. 2012.
Quispe, E. C. “Una Visión Integral para el uso Racional de la Energía en la Aplicación de Motores Eléctricos de Inducción”. El Hombre y la Máquina, No. 20-21, 2003, p 52-59.
Quispe, E. C. y Aguado, J. “Conceptualización para la estimación de la potencia reactiva, incluyendo el efecto de los armónicos de tensión y corriente”. El Hombre y la Máquina, No. 18, 2002, p 48-55.
Quispe, E. C., Lopez-Fernandez, X. M., Mendes, A. M. S., Marques-Cardoso, A. J. y Palacios, J. A. “Influence of the positive sequence voltage on the derating of three-phase induction motors under voltage unbalance”. IEEE International Electric Machines & Drives Conference (IEMDC), 2013, p 100-105.
Quispe, E.C. y Patiño J.E. “El generador de inducción autoexcitado”. Energía y Computación, Vol. IV, No 1, Ed. 9, 1995, p 46-52.
Raj, C.T.; Agarwal, P.; Srivastava, S.P., "Performance Analysis of a Three-Phase Squirrel-Cage Induction Motor under Unbalanced Sinusoidal and Balanced Non-Sinusoidal Supply Voltages," Power Electronics, International Conference on Drives and Energy Systems, 2006. PEDES '06, p.1,4, 12-15 Dic. 2006.
Ramírez, S. y Cano, E. A. “Calidad del Servicio de Energía Eléctrica”. Manizales: Universidad Nacional de Colombia – Sede Manizales. 2003, p 3-5.
Romero-Rueda, M. A. de Armas-Teyra, B. M. Pérez-Mena, y Y. Guerrero-Rojas, “Evaluación energética de motores asincrónicos ante armónicos y desbalance de voltaje en una empresa minera”, Minería Geol., vol. 28, n.o 1, p. 49-61, 2012.
Sen, P. K. y Landa, H. A. “Derating of induction motors due to waveform distortion”, in 36th Annual Petroleum and Chemical Industry Conference IEEE Industrial Applications Society, 1989, p 29- 34.
Sousa, V., Viego, P. y Gómez, J. “Bacterial foraging algorithm application for induction motor field efficiency estimation under unbalanced voltages”. Measurement, Vol. 46, No. 7, 2013, p 2232-2237.
Valencia, D. F. y Quispe E. C. Methodology for Estimating the Influence of Voltage Harmonics on Efficiency and Power Factor of Three-Phase Induction Motors. IEEE 2013 Workshop on Power Electronics and Power Quality Applications (PEPQA). Bogotá, Colombia (Julio 6 y 7), 2013.
Vamvakari, A. Kandianis, A. Kladas, A. Manias, S. y Tegopoulos, J. “Analysis of Supply Voltage Distortion Effects on Induction Motor Operation”, IEEE Transactions on Energy Conversion, Vol. 16, No. 3, 2001, p 209-213.
Waide, P. y Brunner, C. U. “Energy-Efficiency Policy Opportunities for Electric Motors-Driven Systems”. International Energy Agency, Energy Efficiency Series, OECD/IEA, 2011, p 11-13.
