EFECTO DE LA TEMPERATURA DEL SUSTRATO EN LA RUGOSIDAD E ÍNDICE DE REFRACCIÓN EN EL VISIBLE E INFRARROJO CERCANO DE PELÍCULAS DELGADAS DE NITRURO DE TANTALIO
SUBSTRATE TEMPERATURE EFFECT ON THE VISIBLE AND NEAR-INFRARED REFRACTIVE INDEX AND ROUGHNESS OF THIN FILMS OF TANTALUM NITRIDE
DOI:
https://doi.org/10.15446/mo.n61.86003Palabras clave:
Pulverización reactiva, película delgada, nitruro de tantalio, estructura cristalina, elipsometría espectral (SE) (es)Reactive sputtering, thin film, tantalum nitride, crystal structure, spectral ellipsometry (en)
Descargas
El presente trabajo ha sido desarrollado con la finalidad de determinar el efecto del incremento de la temperatura de sustrato sobre su índice de refracción y rugosidad de películas delgadas de nitruro de tantalio (TaN). Las películas delgadas de TaN fueron depositadas sobre obleas de silicio (100) y (111), por la técnica de pulverización magnética reactiva con corriente continua, utilizando una mezcla de gases argón-nitrógeno, a temperaturas de sustratos de 473 K, 573 K y 673 K respectivamente. La caracterización de las muestras fueron realizadas con un difractómetro de rayos X (XRD), la técnica de espectroscopia electrónica Auger (AES), un microscopio electrónico de barrido (SEM), un elipsómetro espectral (SE) y un microscopio de fuerza atómica (AFM). Las películas delgadas de TaN sintetizadas tuvieron una estructura cristalina cúbica centrada en la cara (fcc), que no cambió con el aumento de temperatura, sin embargo aparecen nuevas direcciones de los planos cristalográficos y las intensidades de los picos de difracción disminuyeron. Las muestras estuvieron compuestas de tantalio (65 %), nitrógeno (28 %), oxígeno (5,3 %), carbono y argón. El índice de refracción disminuyó con el incremento de temperatura para longitudes de onda entre el rango visible e infrarrojo cercano 4000 - 12000 Å, mientras que la rugosidad aumentó a medida que la temperatura incrementó, evidenciando un comportamiento no estable.
This work has been developed with the objective to determine the effect of the increase in temperature of substrate on its refractive index and roughness of thin films of tantalum nitride (TaN). The thin films of TaN were deposited on (100) and (111) silicon wafers, by the technique of reactive magnetron sputtering with the direct current using a mixture of argon-nitrogen gases at substrate temperatures of 473 K, 573 K and 673 K, respectively. The Samples were characterized with an X-ray diffractometer (XRD), the Auger electron spectroscopy (AES) technique, a scanning electron microscope (SEM), a spectral ellipsometer (SE) and an atomic force microscope (AFM). The synthesized TaN thin films had a face-centered cubic (fcc) crystal structure, which did not change with increasing temperature, however; new directions of the crystallographic planes appear and the intensities of the diffraction peaks decreased. The samples were composed of tantalum (65 %), nitrogen (28 %), oxygen (5.3 %), carbon and argon. The refractive index decreased with increasing temperature for wavelengths between the visible and near-infrared range 4000 - 12 000 Å, while the roughness increased as the temperature increased, evidencing non-stable behaviour.
Referencias
R. Li, Y. Qin, G. Liu, C. Zhang, H. Liang, Y. Qing, Y. Zhang and K. Zhang, RSC Adv., 7, 55408 (2017).
Y. Zhang, Y. Zheng, Y. Li, L. Wang, Y. Bai, Q. Zhao, X. Xiong, Y. Cheng, Z. Tang, S. Wei, PLoS One, 10 (6), e0130774, (2015).
H.-L. Huang, Y.-Y. Chang, M.-C. Lai, C.-R. Lin, C.-H.Lai, T.-M. Shieh, Surf. coat. technol. (2010).
S.S. Firouzabadi, m. Naderi, K. Dehghani, F. Mahboubi, Journal of Alloys and Compounds 719, 63-70 (2017).
M. Grosser, M. Münch, J. Brenner, M. Wilke, H. Seidel, C. Bienert, A. Roosen, U. Schmid, Microsyst. Technol., 16, 825-836 (2010).
Wen-Horng Lee, Jing-Cheng Lin, Chiapyng Lee, Mater. Chem. Phys, 68, 266- 271 (2001).
T. Elangovan, S. Murugeshan, D. Mangalaraj, P. Kuppusami, Shabhana Khan, C. Sudha, V. Ganesan, R. Divakar, E. Mohandas, Journal of Alloys Compounds, 509, 6400-6407 (2011).
L.P.B. Lima, M.A. Moreira, F.H. Cioldin, J.A. Diniz and I. Doi., ECS Transactions, 31 (1), 319-325 (2010).
H.-R. Chen, Y.-C. Chen, T.-C. Chang, K.-C. Chang, T.-M. Tsai, T.-J. Chu, C.-C. Shih, N.-C. Chuang and K.-Y. Wang., Nanoscale Research Letters 11, 275 (2016).
P. Singh, C. G. Li, P. Pitchappa, and C. Lee, IEEE Electron Device Letters, 34 (8), 987-989 (2013).
A. Scandurra, G.F. Indelli, B. Pignataro, S. Di Marco M.A. Di Stefano, S. Ravesi and S. Pignataro, Surf. Interface Anal. 40, 758-762 (2008).
S.K. Kim, B.C. Cha, Thin Solid Films 475, 202-207 (2005).
D. Bernoulli, U. Müller, M. schwarzenberger, R. Hauert, R. Spolenak, Thin Solid Films 548, 157-161 (2013).
K. Valdez, D.G. Espinosa-arbelaes, J.E. Garcia-Herrera, J. Muñoz-Saldaña, M.H. Farias and W. De la Cruz, Surf. Interface Anal. 47, 1015-1019 (2015).
M. Alishahi, F. Mahboubi, S.M. Musavi Khoei, M. Aparicio, E. Lopez-Elvira,J. Méndez and R. Gago, RSC Adv. DOI: 10.1039/C6RA17869C (2016).
S. Shahidi, B. Moazzenchi, and M. Choranneviss, Eur. Phys. J. Appl. Phys. 71, 31302 (2015).
H.B. Nie, S.Y. Xu, L.P. You, Z. Yang, S.J.Wang, C.K. Ong, Appl. Phys., A 73, 229-236 (2001).
W.-H. Lee, J.-C. Lin, C. Lee, Materials Chemistry and Physics 68, 266-271 (2001).
T. Chen, C. Xu, T.H. Baum, G.T. Stauf, J.F. Roeder, A.G. DiPasquale and A.L. Rheingold, Chem. Mater. 22, 27-35 (2010).
O. O. Abegunde, E.T. Akinlabi, O.P. Oladijo, S. Akinlabi and A.U. Ude, AIMS Materials Science 6 (2), 174-199 (2019).
J.C. Lin, G. Chen, C. Lee, J. Electrochem. Soc. 147 (2), 266-271 (2000).
T. Riekkinen, J. Molarius, T. Laurila, A. Nurmela, I. Suni, J. K. Kivilahti, Microelectronic Engineering. 64, 289-297 (2002).
S. M. Aouadi, D. M. Mihut, M. L. Kuruppu, S. R. Kirkpatrick, S. L. Rohde, J. Vac. Sci. Technol. A 19(6), 2800-2804 (2001).
Y. Y. Wu, M. Eizenberg, Materials Chemistry and Physics, 101, 269-275 (2007).
J. Mistrik, K. Takahashi, R. Antos, M. Aoyama, T. Yamaguchi, Y. Anma, Y. Fukuda, M. B. Takeyama, A. Noya, Z.-T. .Jiang, S. M. Thurgate, G. V. Riessen, Thin Solids Films, 455-456 473-477 (2004).
R. Peña, R.G. Romero-Paredes, G. Aguila-Rodriguez, Superficies y Vacío, 13, 92-96 (2001).
H.S. So, J.-W. Park, D.H. Jung, K.H. Ko, H. Lee., J. Appl. Phys. 118, 085303 (2015).
S. M. Aouadi, M. Debessai, J. Vac. Sci. Technol. A22 (5), 1975-1979 (2004).
H. Xie, B. H. Tan, P.A. Collier and F. L. Ng, J. Wei, Int. J. Nanosci. 3 (4-5), 489 (2004).
Y.X. Leng, H. Sun, P. Yang, J.Y. Chen, J. Wan, N. Huang, X.B. Tian, L.P. Wang, P.K. Chu., Thin Solid Films 398-399, 471 (2001).
J. Xu, L. Liu, P. Munroe and Z.-H. Xie, J. Mater. Chem. B, 3, 4082 (2015).
H-L Huang, Y.-Y. Chang, M.-C. Lai, C.-R. Lin, C.-H. Lai, T.-M. Shieh, Surf. Coat. Technol., 205, 1636 (2010).
X. Liu, G.J. Ma, G. Sun, Y.P. Duan, S.H. Liu, Appl. Surf. Sci. 258, 1033 (2011).
J.A. Woollam Co. Inc., A Short Course in Ellipsometry (2001).
H. Fujiwara, Spectroscopic Ellipsometry: Principles and Applications (John Wiley & Sons Ltd., 2007) pp. 81{82.
J. M. Albella, Láminas Delgadas y Recubrimientos: Preparación, Propiedades y aplicaciones, Consejo Superior de Investigaciones Científicas (CSIC): Madrid. (2003) pp. 378-379.
J.A. Woollam, Co.,Inc, Complete Ease, data Analysis manual, (2011).
M. Grosser, M. Munch, H. Seidela, C. Bienert, A. Roosenb, U. Schmid, Appl. Surf. Sci. 258, 2894 (2012).
R. Martín-Palma, J. Martínez-Duart, and A. M. I. Riera, Bol. Soc. Esp. Cerám. Vidrio 39, 472 (2000).
E.D. Palik, Handbook of Optical Constants of Solids II, Academic Press, Inc. New York, (1991) pp. 417-418.
E. Langereis, H.C. Knoops, A.J. Mackus, F. Roozeboom, M.C. van de Sanden, W.M.M. Kessels., J. Appl. Phys. 102, 083517 (2007).
Cómo citar
APA
ACM
ACS
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Descargar cita
Licencia
Derechos de autor 2020 MOMENTO
![Creative Commons License](http://i.creativecommons.org/l/by-nd/4.0/88x31.png)
Esta obra está bajo una licencia internacional Creative Commons Atribución-SinDerivadas 4.0.
Aquellos autores/as que tengan publicaciones con esta revista, aceptan los términos siguientes:- Los autores/as conservarán sus derechos de autor y garantizarán a la revista el derecho de primera publicación de su obra, el cuál estará simultáneamente sujeto a la Licencia de reconocimiento de Creative Commons Atribución-SinDerivar 4.0 International que permite la redistribución, comercial o no comercial, siempre y cuando la obra circule íntegra y sin cambios, donde indique su autor y su primera publicación en esta revista.
- Se permite y recomienda a los autores/as difundir su obra a través de Internet (p. ej.: en archivos telemáticos institucionales o en su página web) antes y durante el proceso de envío, lo cual puede producir intercambios interesantes y aumentar las citas de la obra publicada.