Correo Electrónico
DNINFOA - SIA
Bibliotecas
Convocatorias
Identidad U.N.
Published
Obtención de ceras para el proceso de fundición a la cera perdida
DOI:
https://doi.org/10.15446/ing.investig.n29.20800Keywords:
Microfundición, Obtención de ceras, Fundición de ceras, Proceso de la Cera Perdida (es)Microfundición, Obtención de ceras, Fundición de ceras, Proceso de la Cera Perdida (en)
Downloads
En este trabajo se presenta la composición de tres ceras, relativamente económicas y de gran disponibilidad, que exhiben condiciones adecuadas para utilizarse en el proceso de MICROFUNDICION. Para definirlas se estudió la influencia de los modelos de cera en cada una de las etapas del proceso y se planteó una serie de experimentos que evaluaron las características y propiedades más importantes, como punto de fusión, punto de ablandamiento, curva de enfriamiento, curva de flujo, expansión volumétrica, contracción lineal, resistencia, contenido de cenizas y penetración, entre otras.
References
Barrera, Fabio y Osorio, Henry. Obtención de Ceras para el Proceso de Fundición a la Cera Perdida. Proyecto de Grado - Universidad Nacional de Colombia- Santafé de Bogotá 1992.
Beeley, P.R., Investment Casting. Foundry Technology. Butterworths. London, 1972. p. 13-39.
Bergeman, Myron. Procesos de Vaciado de Precisión a la Cera Perdida. Procesos de Manufactura. C.E.C.S.A. 1a. Edición. España 1960. p. 137-149.
Briscoe, E. M., Rose K. y Ronca, E. Ceramics in the Investment-casting Industry. Foundry Trade Journal. Londres, Mayo 4, 1967. p. 511-521.
Cook, Gleen J. Investment Casting. Engineered Castings. McGraw Hill Book Co. New York, 1961. p. 57-61.
Cronite Precision Castings Limited. Cronite investin. Lost-wax. Foundry Trade Journal, Londres, Julio 29, 1982. p. 167-174.
Donaldson, E. G. Investment Castings, British Investment Casters Technical Association, BICTA, 36 págs.
Donaldson, E. G. Patterns Materials and Their Use in investment Castings. British Investment Casters Technical Association, BICTA, 21 págs.
Ekey, D. E. y Winter, W. P., Investment Casting Process. Introduction to Foundry Technology. McGraw Hill. New York, 1956. p. 67-77.
Green-Spikeskey, E. Investment Casting. The Process and the Product. Metallurgic and Metal Forming. Londres, Julio 1975. p. 208-211. Foundry Trade Journal, Londres, Marzo 27, 1969.
Marek, Clarence. Investment Molds. Fundamentals in the Production of Metals Castings. p. 16-21.
Marty, John y Payne, Michael. Wax Testing Helps Control Pattern Variation. Modem Casting. Febrero 1989. Pág. 55.
Peyton, Floys A. y Antony, David H. Ceras Materiales Dentales Restauradores. Editorial Mundial. 1a. Edición, Buenos Aires 1964. p. 218-239.
Pogodin, G. I., Razumov, N. A. y Titov, N. D. La Colada a la Cera Perdida. Procesos Tecnológicos Progresivos en la Construcción de Maquinaria. Editorial Mir. Moscú. p. 261-267.
SENA. Moldeo de Precisión. Centro Nacional de Fundición. Bogotá, 1988.
Seymour, Raymond B. Petroleum Waxes. Hot Organic Castings. Reinhold Publishing Co. New York 1959. p. 49-81.
Salomon, P. Pattern Materials for Investment Casting. Foundry Trade Journal, Londres, Marzo 27, 1969. p. 525-528.
Sylvia, J. Gering. Investment Casting. Cast Metals Technology. Addison-Wesley Publishing Co. U.S.A. 1972. p. 46-65.
Wood, Rawson L. Investment Casting. ASME Handbook. Metals Engineering Processes. McGraw Hill Book Co. First Edition. New York 1958. p. 38-48.
How to Cite
APA
ACM
ACS
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
CrossRef Cited-by
Dimensions
PlumX
Article abstract page views
Downloads
License
Copyright (c) 1993 José William Moreno Portillo
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors or holders of the copyright for each article hereby confer exclusive, limited and free authorization on the Universidad Nacional de Colombia's journal Ingeniería e Investigación concerning the aforementioned article which, once it has been evaluated and approved, will be submitted for publication, in line with the following items:
1. The version which has been corrected according to the evaluators' suggestions will be remitted and it will be made clear whether the aforementioned article is an unedited document regarding which the rights to be authorized are held and total responsibility will be assumed by the authors for the content of the work being submitted to Ingeniería e Investigación, the Universidad Nacional de Colombia and third-parties;
2. The authorization conferred on the journal will come into force from the date on which it is included in the respective volume and issue of Ingeniería e Investigación in the Open Journal Systems and on the journal's main page (https://revistas.unal.edu.co/index.php/ingeinv), as well as in different databases and indices in which the publication is indexed;
3. The authors authorize the Universidad Nacional de Colombia's journal Ingeniería e Investigación to publish the document in whatever required format (printed, digital, electronic or whatsoever known or yet to be discovered form) and authorize Ingeniería e Investigación to include the work in any indices and/or search engines deemed necessary for promoting its diffusion;
4. The authors accept that such authorization is given free of charge and they, therefore, waive any right to receive remuneration from the publication, distribution, public communication and any use whatsoever referred to in the terms of this authorization.
