Solución de redes de flujo para gases usando el modelo de balance de nodos y el método de linealización de ecuaciones
DOI:
https://doi.org/10.15446/ing.investig.n44.21300Keywords:
Flujo de gas, Redes de gas, Caída de presión en tuberías, Sistemas de tuberías, Método de Hardy Cross, Método de Newton, Método de linealización de Ecuaciones (es)Gas flow, Gas networks, Pressure drop in pipes, Piping systems, Hardy Cross method, Newton method, linearization of equations method (en)
Downloads
El dimensionamiento de redes de distribución de gases es un problema complejo, tanto por la diversidad de los fenómenos que se presentan, como por la variación de las propiedades de los fluidos, en especial, la densidad por efecto de los cambios en la presión a lo largo de la red. Este trabajo presenta un modelo para su simulación a partir de la deducción de la ecuación general de flujo en estado estable e isotérmico, su inclusión en el modelo de balance de nodos y la solución de éste por el método de linealización de ecuaciones. Adicionalmente, se hace un resumen de las ecuaciones empíricas más usadas para el cálculo de la caída de presión para gases fluyendo en tuberías y un ejemplo que ilustra la aplicación del modelo y el método desarrollado.
References
Altman, T., et al. “Solving Flow Constrained Networks: Inverse Problem”, Journal of the Hydraulic Engineering, Vol. 121, No HY 5, May 1995, pp 427-431. DOI: https://doi.org/10.1061/(ASCE)0733-9429(1995)121:5(427)
Arnold, K. y Stewart, M. Surface Production Operations, Gulf Publishing Company, Houston, Texas, 1987.
Chen, N.I. “An Explicit Equation for Friction Factor in Pipe”, Industrial Engineering and Chemical Fundamentals, Vol. 18, No. 3, 1979, pp 296-297. DOI: https://doi.org/10.1021/i160071a019
Gas Processors Suppliers Association Editor, “Fluid Flow and Piping”, Gas Processors Suppliers Association Engineering Handbook, Tenth Edition, Vol. II, Section 17, Tulsa, Oklahoma, Estados Unidos, 1994.
Hollman, J. Heat Transfer, SI Metric Edition, Mc Graw Hill, Singapore, 1989.
Mc Allister, E. W. Editor, “Gas Hydraulics”, Pipe Line Rules of Thumb Handbook, Gulf Publishing Company, Houston, Texas, Estados Unidos, 1993, pp. 643.
Narváez, P.C., “Prototipo de Software para el Dimensionamiento de Redes de Flujo a Presión”, tesis presentada a la Universidad Nacional de Colombia para optar por el título de Magister en Ingeniería Química, 1998.
Narváez, PC., et. al., “Solución de Redes Hidráulicas Mediante la aplicación del Modelo de Balance de Nodos y el Método de Linealización de Ecuaciones”, Ingeniería e Investigación, No. 42, Abril de 1999. DOI: https://doi.org/10.15446/ing.investig.n44.21300
Osiadacz, A. J. Simulation and Analysis of Gas Network, Gulf Publishing Company, London, Great Britain, 1987.
Wood, D. J., et al. “Reliability of Algoritmhms for Pipe Network Analysis”, Journal of the Hydraulics Division, Vol 107, No HY 10, October 1981, pp 1145-1161. DOI: https://doi.org/10.1061/JYCEAJ.0005739
____ “Hydraulic Network Analysis Using Linear Theory”, Journal of the Hydraulics Division, Vol 98, No HY 7, July 1972, pp 1157-1169. DOI: https://doi.org/10.1061/JYCEAJ.0003348
How to Cite
APA
ACM
ACS
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
CrossRef Cited-by
1. Paulo César Narváez. (1999). Solución de redes de flujo para gases usando el modelo de balance de nodos y el método de linealización de ecuaciones. Ingeniería e Investigación, (44), p.56. https://doi.org/10.15446/ing.investig.n44.21300.
Dimensions
PlumX
Article abstract page views
Downloads
License
Copyright (c) 1999 Paulo César Narváez

This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors or holders of the copyright for each article hereby confer exclusive, limited and free authorization on the Universidad Nacional de Colombia's journal Ingeniería e Investigación concerning the aforementioned article which, once it has been evaluated and approved, will be submitted for publication, in line with the following items:
1. The version which has been corrected according to the evaluators' suggestions will be remitted and it will be made clear whether the aforementioned article is an unedited document regarding which the rights to be authorized are held and total responsibility will be assumed by the authors for the content of the work being submitted to Ingeniería e Investigación, the Universidad Nacional de Colombia and third-parties;
2. The authorization conferred on the journal will come into force from the date on which it is included in the respective volume and issue of Ingeniería e Investigación in the Open Journal Systems and on the journal's main page (https://revistas.unal.edu.co/index.php/ingeinv), as well as in different databases and indices in which the publication is indexed;
3. The authors authorize the Universidad Nacional de Colombia's journal Ingeniería e Investigación to publish the document in whatever required format (printed, digital, electronic or whatsoever known or yet to be discovered form) and authorize Ingeniería e Investigación to include the work in any indices and/or search engines deemed necessary for promoting its diffusion;
4. The authors accept that such authorization is given free of charge and they, therefore, waive any right to receive remuneration from the publication, distribution, public communication and any use whatsoever referred to in the terms of this authorization.