Correo Electrónico
DNINFOA - SIA
Bibliotecas
Convocatorias
Identidad U.N.
Published
The state of the art and new developments in voltage sag immunity
Estado del arte y nuevos desarrollos en inmunidad frente a huecos de tensión (sags)
Keywords:
electromagnetic compatibility, equipment immunity, power quality, sag generator, voltage sags (en)Calidad de potencia, compatibilidad electromagnética, generador de huecos de tensión, huecos de tensión, inmunidad de equipos eléctricos (es)
This paper presents the state of the art regarding electrical equipment's immunity to voltage sags. It deals with immunity analysis and voltage sag generators. An alternative methodology for testing equipment regarding voltage sag is proposed, along with immunity assessment. A comprehensive bibliographic review was made, describing voltage sag immunity standards and selected research and industry publications. The proposed methodology for assessing immunity was based on the literature presented and the authors' work.
En este artículo se presenta el estado del arte en inmunidad de equipos eléctricos frente a huecos de tensión. Se incluyen dos grandes tópicos: análisis de inmunidad y generadores de huecos de tensión. Como resultado, se propone una metodología alternativa para analizar la inmunidad de equipos eléctricos a los huecos de tensión. También se presenta una completa revisión bibliográfica, incluyendo estándares con referencia a inmunidad y una selección de publicaciones de la academia y la industria. La metodología propuesta para el análisis de inmunidad se basa en la bibliografía presentada y el trabajo de los autores.
Downloads
References
Andersson, T. and Nilsson, D. ''Test and evaluation of voltage dip immunity''. STRI AB, Vatenfall AB, Chalmers University of Technology. Gotemburg. 2002. M. S. thesis.
Bollen M. and Gu, I. Signal Processing of Power Quality Disturbances. IEEE Press on Power Engineering, 2006.
Bollen, M; Understanding Power Quality Problems: Voltage Sags and Interruptions. IEEE Press on Power Engineering, 2000.
Chung, Y. et al. ''Voltage sag and swell generator with thyristor controlled reactor''. Proceedings. PowerCon 2002. International Conference on Power System Technology. R&D Center, LG Ind. Syst. Co. Ltd, Kyunggi-Do, South Korea, 2002.
CIGRE/CIRED/UIE Joint Working Group C4.110. Voltage Dip Immunity of Equipment and Installations. 2010.
Collins, E. and Morgan, R. ''A three-phase sag generator for testing industrial equipment''. IEEE Transactions on Power Delivery. Dept. of Electr. & Comput. Eng., Clemson Univ., SC, 2002.
Conrad, L. and Bollen, M. ''Voltage sag coordination for reliable plant operation''. IEEE Transactions on Industry Applications. Plainfield, IN: Cinergy Corp, 1997.
Dugan, R. et al. Electrical Power Systems Quality. (2 Ed.). New York: McGraw-Hill, 2002.
EPRI. Cost-Effective Storage Technologies as Embedded Solutions for Ride-Through. Voltage Sag Testing of Advanced Machine Tools at NIST. Technical report. 2000.
ICONTEC. NTC 5001. Calidad de la Potencia Eléctrica. Límites y Metodología de Evaluación en Punto de Conexión Común. 2008.
IEEE Std 493. IEEE Industry Applications Society. IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems. 1997.
Key, T. ''Diagnosing Power Quality-Related Computer Problems. IEEE Transactions on Industry Applications''. Albuquerque, NM: Sandia Laboratories, 1979.
McGranaghan, M. ''Voltage sags in industrial systems''. IEEE Transactions on Industry Applications. Knoxville, TN: Electrotek Concepts Inc, 1993.
Salamanca, D. ''Metodología para evaluar el impacto económico de los sags de voltaje en usuarios industriales conectados a un sistema de distribución radial''. Ingeniería Eléctrica y Electrónica, Universidad de los Andes. Bogotá, 2007. Thesis.
Salib, A. ''Voltage Sag Ride-Through and Harmonics Mitigation for Adjustable Speed Drives Using Dual-Functional Hardware. Electrical and Computer Engineering'', University of Waterloo. Waterloo, 2006. M. S. thesis.
Takahashi, R. et al. ''A prototype implementation of a voltage sag generator''. Induscon. VIII International Conference of Industrial Applications. Federal University of Itajubá - Power Electronics and Applications Research Group (GPEPA). Brazil, 2008.
Tenaga Nasional Berhad. Voltage Sag Solutions for Industrial Customers. Power Quality Guidebook. 2007.
Trujillo, C. ''Metodología para la evaluación del impacto de las variaciones de tensión (sags) sobre equipo electrónico de potencia''. Ingeniería Eléctrica, Universidad Nacional de Colombia. Bogotá, 2005. M. S. thesis.
Wessels, C; Fuchs, F.W. and Lohde, R. ''Transformer Based Voltage Sag Generator to perform LVRT and HVRT Tests in the Laboratory''. 14th International Power Electronics and Motion Control Conference, EPE-PEMC. Kiel, Germany. Institute of Power Electronics and Electrical Drives, Christian-Albrechts-University of Kiel, 2010.
Yan, M. and Karady, G. ''A single-phase voltage sag generator for testing electrical equipments''. Transmission and Distribution Conference and Exposition. Dept. of Electr. Eng., Arizona State Univ., Tempe, AZ, 2008.
Zhang, Y. ''Techno-economic Assessment of Voltage Sag Performance and Mitigation''. Manchester University. Manchester, 2008. Dr. thesis.
License
Copyright (c) 2011 Joaquín Caicedo, Felipe Navarro, Edwin Rivas, Francisco Santamaría
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors or holders of the copyright for each article hereby confer exclusive, limited and free authorization on the Universidad Nacional de Colombia's journal Ingeniería e Investigación concerning the aforementioned article which, once it has been evaluated and approved, will be submitted for publication, in line with the following items:
1. The version which has been corrected according to the evaluators' suggestions will be remitted and it will be made clear whether the aforementioned article is an unedited document regarding which the rights to be authorized are held and total responsibility will be assumed by the authors for the content of the work being submitted to Ingeniería e Investigación, the Universidad Nacional de Colombia and third-parties;
2. The authorization conferred on the journal will come into force from the date on which it is included in the respective volume and issue of Ingeniería e Investigación in the Open Journal Systems and on the journal's main page (https://revistas.unal.edu.co/index.php/ingeinv), as well as in different databases and indices in which the publication is indexed;
3. The authors authorize the Universidad Nacional de Colombia's journal Ingeniería e Investigación to publish the document in whatever required format (printed, digital, electronic or whatsoever known or yet to be discovered form) and authorize Ingeniería e Investigación to include the work in any indices and/or search engines deemed necessary for promoting its diffusion;
4. The authors accept that such authorization is given free of charge and they, therefore, waive any right to receive remuneration from the publication, distribution, public communication and any use whatsoever referred to in the terms of this authorization.
