Correo Electrónico
DNINFOA - SIA
Bibliotecas
Convocatorias
Identidad U.N.
Published
Revisión de las investigaciones con base en el estudio de las pinturas para moldes en la industria de la fundición
DOI:
https://doi.org/10.15446/ing.investig.n5.28814Keywords:
ingeniería de materiales, pinturas para fundición, pinturas para moldes, moldes metálicos (es)Ingeniería de materiales, pinturas para fundición, pinturas para moldes, moldes metálicos (en)
Downloads
Las pinturas para moldes son sustancias de muy diversa naturaleza, utilizadas para recubrir las superficies de los moldes que estarán en íntimo contacto con el metal fundido y que buscan la sanidad completa de la pieza. La presente revisión hace énfasis en el papel que tiene la pintura como regulador térmico en los moldes metílicos y describe los parámetros que deben tenerse en cuenta para la correcta caracterización.
References
A. Veinik, Thermodynamics for the Foundry man. McLaren and Son Ltd., 1968.
D. R. Thorton, An investigation on the functions of ingot mould dressings, JISI, July 1956, pp. 301-315.
A. Morales, “Las Pinturas de molde en las Aleaciones Superficiales”, próximo a publicarse.
M. J. Colas y X. Virolle, Enduits pour les coutées en sable silicoargileux, CTIF Fonderie 162, Jullet 1959, p. 298.
D. Shirey y D. C. Williams, Observations on factors affecting moldmetal interfacial penetration phenomena, Transactions AFS, Vol. 76, 1968, pp. 661-674.
J. M. Svoboda y G. H. Geiger, Mechanism of metal penetration in Foundry moulds. AFS, Vol. 77, 1969, pp. 281-2-3.
Cast surface evaluation for roughness standards. Eldon Swing AFS Transactions, Vol. 67, 1959, p.300.
Poteyages pour les moules en Fonderie D’Acier. Traduction Fonderie 182, Mars 1961, CTIF.
M. Douzy, Tenue des poteyages pour la coulée en coquilles des alliages légers, Fonderie 228, Fevrier 1965.
Poteyages de coquilles pour le moulage du latiton. Fonderie Ne 114, Juillet 1955, pp. 4616-4617.
Doittau, Produits, Fonderies, Products Divers Corbeil, Essones.
G. Stroganov y S. L. Natapov, Dusting moulds, with hexacloroethane, Russian casting production, March 1971, p. 127.
Etudes de Coquilles, Temperatures d'emploi, Fonderie 135, April 1957, pp. 167-168.
L. Atchison y V. Kondic, The casting of non ferrous ingots, pp. 151-156-299, McDonald Evans Editor.
M. C. Flemings, C. Taylor, Aluminium alloys fluidity. Fluidity tripped with a new mold coating, AFS, Vol. 67, 1959. pp. 496-508.
Charles Reynolds, Thermal behavior of Dies and Permanent molds, Transactions AFS 1964, Vol 72, pp. 342-347.
S. Parent, Coulée en coquilles des fontes, Simonin et Jean Parisien B 4221 Fonderie 331 Fevrier 1974, p. 75.
Evolution technique de la Fonderie sous pression. Jean Parisien Ci II Fonderie 329, Dic. 1973.
Victor Paschkis, Transient Healt Flow, AFS, Heat Transfer Committee, pp. 100-103. Transactions, AFS 56-41.
J. M. Muller, Mise au point des Poteyages et Problemes de Transmision de la Chaleur dans la coulée en coquille d’Aluminium, Fonderie, Juillet 1965, pp. 292-293.
Fundición, p.44, Revista Sulzer grafica N° 4065 ó 204.
G.N. Tuluzov y N. M. Martinenko, Factors affecting the thermal conductivity of die facings, Russian casting production, pp. 86-87.
G.N. Tuluzov, Selection of die coatings. Russian casting, p. 83, marzo 1973.
A. R. Rabinovich, Initial metal-mold heat exchange, Russian casting production, pp. 276-279, 1966.
Álvaro Morales, “Efecto de la Naturaleza de la Superficie de Molde sobre la Transferencia Calórica en el sistema Metal-Molde y las estructuras resultantes”, Universidad del Rosario CNEA, Argentina Bs.As., 1975, p. 81.
M. Prates de Campos Filho y H. Biloni, Variables que condicionan la naturaleza de la zona chill de los lingotes. Metallurgical Transactions, Vol. 3, 1972, 1501.
How to Cite
APA
ACM
ACS
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
CrossRef Cited-by
Dimensions
PlumX
- Captures
- Mendeley - Readers: 2
Article abstract page views
Downloads
0
License
Copyright (c) 1983 Álvaro Morales
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors or holders of the copyright for each article hereby confer exclusive, limited and free authorization on the Universidad Nacional de Colombia's journal Ingeniería e Investigación concerning the aforementioned article which, once it has been evaluated and approved, will be submitted for publication, in line with the following items:
1. The version which has been corrected according to the evaluators' suggestions will be remitted and it will be made clear whether the aforementioned article is an unedited document regarding which the rights to be authorized are held and total responsibility will be assumed by the authors for the content of the work being submitted to Ingeniería e Investigación, the Universidad Nacional de Colombia and third-parties;
2. The authorization conferred on the journal will come into force from the date on which it is included in the respective volume and issue of Ingeniería e Investigación in the Open Journal Systems and on the journal's main page (https://revistas.unal.edu.co/index.php/ingeinv), as well as in different databases and indices in which the publication is indexed;
3. The authors authorize the Universidad Nacional de Colombia's journal Ingeniería e Investigación to publish the document in whatever required format (printed, digital, electronic or whatsoever known or yet to be discovered form) and authorize Ingeniería e Investigación to include the work in any indices and/or search engines deemed necessary for promoting its diffusion;
4. The authors accept that such authorization is given free of charge and they, therefore, waive any right to receive remuneration from the publication, distribution, public communication and any use whatsoever referred to in the terms of this authorization.
