Correo Electrónico
DNINFOA - SIA
Bibliotecas
Convocatorias
Identidad U.N.
Published
Adaptación de tecnología en la fabricación de fundiciones nodulares
Keywords:
fundiciones nodulares, horno de cubilote (es)fundiciones nodulares, horno cubilote (en)
Downloads
La producción de fundiciones nodulares de manera competitiva y económica, exige del conocimiento a fondo de las variables implicadas en el proceso; lo cual permite obtener la amplia gama de propiedades que reúne este grupo de aleaciones. En este documento se presentan los resultados y conclusiones alcanzados, al hacer algunas modificaciones en las variables de los procesos de fabricación. Además, se muestra el horno de cubilote como una alternativa al alcance de la pequeña y la mediana industria para la producción económica de fundiciones nodulares.
Downloads
References
Gray Iron Founder's Society. Manuel des Fontes Movleés, traduit et adapté de “The Gray Iron Castings Handbook” Ed. Techniques des Industries de la Founderie. 1965.
Heine R., Loper C., Rosenthal. Principles of Metal Casting. Mc. Graw Hill Book Co. 1967
Gurri Robert. Darken Lawrence. Physical Chemistry of Metals. Mc. Graw Hill Publishing Company Inc.
A.F.S. El Horno de Cubilote y su Operacióon. C.E.C.S.A. 1974.
A.S.M. Metals Handbook. Vol. 5. Ed. Taylor. Lyman, 1969.
Verhoeven John D. Fundamentals of Physical Metallurgy. John Wiley and Sons. Inc., 1975.
Prof. Y. Lakhtin. Engineering Physical Metallurgy. Foreign Languages Publishing House, Moscow.
Stephen I. Karsay. Ductile iron Production. Quebec, Iron and Titanium Corporation.
Robert E. Treybal. Mass Transfer Operations. 2nd International Students Edition. Koga Kusha, Japan.
B.C.I.R.A. Factors influencing the production of cast iron. BCIRA. 1970.
British Foundryman. Production of castings in flake and spheroidal graphite austenitic iron. May, 1972.
C.T.I.F. Fabrication de la fonte a graphite spheroidal par les procedes au magnesium. Janvier, 1975, Fo 96.
C.T.I.F. Fusion de la fonte au cubilot. Aspect thermique-aspect chemique. Novembre 1964. Fo 116.
C.T.I.F. Fonte austenitique avec nickel (cuivre) chrome a graphite lamellaire au spheroidal. Mars 1971. Fo 52.
Gisserei. Fontes austenitiques avec graphite spheroidal. No. 4, 1966.
Colada, Ciencia y Tecnología. Algunas observaciones sobre el funcionamiento de cubilotes modernos provistos de perfeccionamientos recientes. Jean Frachet, Louis Chazé, Centre Technique des industries de la founderie. Volumen 10, No. 12, 1977.
Modern Casting. A.F.S. Divided blast cupola. Fred Schleg Associate Editor. M. C. September, 1975.
Modern Casting. A.F.S. New Cupola technology. B.J. Davies and A. O. Bain, Canron Limited, Hamilton, Ontario, M. C. September, 1975.
Foundry Trade Journal. Switch to twin-blas. Cupola modification boots production W and T. Avery Limited Progress and Development Report. July 20, 1978.
A.F.S. Transaction. Cupola Technology - Key to reduce melting energy and cost. A. B. Draper prof. and J. Gerin Sylvia P. E. Dept. of Industrial and Management System Engineering Center for Air Environments studies. The Pennsylvania State University. University Park, Pennsylvania, U.S.A
The British Foundryman. Cupola Melting in U.K. Iron foundries. J. D. Hill, National Smokeless Fuels Limited. October, 1978.
License
Copyright (c) 1984 Héctor Mosquera Mosquera, Álvaro Forero M., Héctor Delgado F., Félix Ochoa M.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors or holders of the copyright for each article hereby confer exclusive, limited and free authorization on the Universidad Nacional de Colombia's journal Ingeniería e Investigación concerning the aforementioned article which, once it has been evaluated and approved, will be submitted for publication, in line with the following items:
1. The version which has been corrected according to the evaluators' suggestions will be remitted and it will be made clear whether the aforementioned article is an unedited document regarding which the rights to be authorized are held and total responsibility will be assumed by the authors for the content of the work being submitted to Ingeniería e Investigación, the Universidad Nacional de Colombia and third-parties;
2. The authorization conferred on the journal will come into force from the date on which it is included in the respective volume and issue of Ingeniería e Investigación in the Open Journal Systems and on the journal's main page (https://revistas.unal.edu.co/index.php/ingeinv), as well as in different databases and indices in which the publication is indexed;
3. The authors authorize the Universidad Nacional de Colombia's journal Ingeniería e Investigación to publish the document in whatever required format (printed, digital, electronic or whatsoever known or yet to be discovered form) and authorize Ingeniería e Investigación to include the work in any indices and/or search engines deemed necessary for promoting its diffusion;
4. The authors accept that such authorization is given free of charge and they, therefore, waive any right to receive remuneration from the publication, distribution, public communication and any use whatsoever referred to in the terms of this authorization.
