Coffe drying on fluidised bed
Secado de café en lecho fluidizado
DOI:
https://doi.org/10.15446/ing.investig.v26n1.14684Keywords:
drying, coffee drying, fluidisation, coffee parchment (en)secado, secado de café, fluidización, lecho fluidizado, café pergamino (es)
Downloads
All coffee is harvested as cherry grains which are then crushed and extracted traditionally or by applying the Becolsub method. Once the coffee parchment obtained has been washed, it is naturally or mechanically dried.
Static dryers are the most used mechanical dryers, generally producing lack of uniformity in the grain's final humidity content which must range from 10% to 12% b.h. Drying by fluidization was used in the present research work; this turns a solid particle bed into a suspended and expanded mass, possessing many of the properties of a liquid. A 5,000 g capacity prototype was designed and constructed in which coffee was dried at three air drying temperatures: 42°C, 46°C and 49°C; drying time lasted 6 to 8 hours. Good uniformity in final grain humidity content was obtained, differences being less than 0.86%. As well as the grain test, a control cup test was used, finding that the product presented good organoleptic qualities.
Todo el café se cosecha en grano cereza, el cual se beneficia en forma tradicional o aplicando el método Becolsub o de beneficio ecológico. Una vez lavado el café pergamino obtenido, se seca en forma natural o mecánicamente.
Los secadores mecánicos más utilizados son de tipo estático, en los cuales generalmente se presentan problemas de desuniformidad en el contenido de humedad final del grano, la cual debe oscilar entre 10 y 12% b.h. En el presente trabajo de investigación se empleó el sistema de secado mediante fluidización, el cual convierte un lecho de partículas sólidas en una masa suspendida y expandida que posee muchas de las propiedades de un líquido. Se diseñó y construyó un prototipo de 5000 g de capacidad, en el cual se secó café bajo tres condiciones de temperatura del aire de secado: 42, 46 y 49°C. El tiempo de secado varió de 6 a 8 horas. Se obtuvo una buena uniformidad en el contenido de humedad final del grano, con diferencias menores a 0.86%. Además, al grano se le hizo prueba de taza, obteniéndose que el producto presenta características organolépticas de buena calidad.
References
Álvarez, J. R., López, R. y Cardona, A., Pérdidas causadas por el secado excesivo de café., Avance Técnico No. 84. Cenicafé, 1978.
Buitrago, J., Diseño de un reactor de lecho fluidizado, a nivel piloto para carboxilación de Fenoxido de potasio, con gas carbónico. Tesis Ingeniería Química, Universidad Nacional de Colombia. Facultad de Ingeniería. Departamento de Ingeniería Química, 1996.
Centro Nacional de Investigaciones de Café. Beneficio Ecológico de Café. Ingeniería Agrícola. Edit. Cenicafé, 1999, pp. 273.
Cleves, R., Tecnología en Beneficio del café. Costa Rica. Edit. Nuevo mundo, 2000, pp. 330.
Correa, A., Evaluación del secado de café -coffea arábica- en un secador intermitente de flujos concurrentes. Tesis Ingeniero Agrícola, Universidad Nacional de Colombia, Facultad de Agronomía, Sede Medellín, 1987, pp. 258.
Duarte, T. A., Operaciones de transferencia de momentum y Manejo de sólidos. Universidad Nacional de Colombia. Facultad de Ingeniería, Departamento de Ingeniería Química. Bogotá, 1998, pp. 276.
FAO (Oficina Regional de la FAO para América Latina y el Caribe). Secado de granos natural, solar y a bajas temperaturas, Serie Tecnología Poscosecha 9, Santiago de Chile, Chile, 1991.
FEDERACAFE, Federación Nacional de Cafeteros de Colombia. Sistema de Información, Encuesta Nacional Cafetera. SICA. Estadísticas Cafeteras, Informe final, Bogotá, 1997.
Finzer, J.R.D., et al., Drying coffee beans in vibraten trays dryer., Drying technology, 15(6-8), 1997, pp. 1983-1994. DOI: https://doi.org/10.1080/07373939708917343
Hemati, M., et al., Continuous and Intermittent drying of maize in a flotation fluidized bed., In Fluidization VII, Ensigc Chenmin de la loge, Toulouse Cedex, France, pp. 831-839.
Jaramillo, B. G., Propiedades físicas del café pergamino. Universidad Nacional de Colombia, Facultad de Ciencias, Departamento de Física, Bogotá, 1989.
Kunni, D. and Levenspiel, O., Fluidization Engineering., Edit. John Wiley and sons, EEUU, 1969, pp. 430.
López, F, E. M., Secado Mecánico de Granos en Lecho Fluidizado. Tesis Maestría en Automatización Industrial, Universidad Nacional de Colombia, Bogotá, 2003.
Mc.Cabe., Operaciones Básicas de Ingeniería Química., Edit. Mc Graw Hill, 1996, pp. 660.
Ospina, J.E., Silo Secador CENICAFE., Informe de año sabático, Federación Nacional de Cafeteros de Colombia, Centro Nacional de Investigaciones de Café, "Pedro Uribe Mejía", Chinchiná, 1990, pp. 57.
Parra, A., Evaluación y utilización practica de los modelos de simulación matemática de Michigan y de Thompson en el secado de café con aire forzado. CENICAFE, 51(3), 2001. pp. 3-21.
Pérez, C. A., Diseño e Implementación de un pre secador continuo de arroz, de lecho fluidizado., Tesis de Maestría en Ingeniería Mecánica, Universidad de los Andes, Bogotá, 2000, pp. 120.
Perrot, N., et al., Application of fuzzy rules-based models to prediction of quality degradation of rice and maize during hot air drying., Drying Technology, 16(8), 1998. pp. 1533-1565. DOI: https://doi.org/10.1080/07373939808917479
Perry, R y Chilton, C., Manual del Ingeniero Químico., Edit. Mc Graw Hill, Tomo 2-6, 1994, pp. 550.
Sivets, M and Foote, H., Coffee processing technology, Westport, (Estados Unidos) AVI publishing Co., 1963, pp. 100-154.
How to Cite
APA
ACM
ACS
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
CrossRef Cited-by
Dimensions
PlumX
Article abstract page views
Downloads
License
Copyright (c) 2006 Elkin Mauricio López Fontal

This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors or holders of the copyright for each article hereby confer exclusive, limited and free authorization on the Universidad Nacional de Colombia's journal Ingeniería e Investigación concerning the aforementioned article which, once it has been evaluated and approved, will be submitted for publication, in line with the following items:
1. The version which has been corrected according to the evaluators' suggestions will be remitted and it will be made clear whether the aforementioned article is an unedited document regarding which the rights to be authorized are held and total responsibility will be assumed by the authors for the content of the work being submitted to Ingeniería e Investigación, the Universidad Nacional de Colombia and third-parties;
2. The authorization conferred on the journal will come into force from the date on which it is included in the respective volume and issue of Ingeniería e Investigación in the Open Journal Systems and on the journal's main page (https://revistas.unal.edu.co/index.php/ingeinv), as well as in different databases and indices in which the publication is indexed;
3. The authors authorize the Universidad Nacional de Colombia's journal Ingeniería e Investigación to publish the document in whatever required format (printed, digital, electronic or whatsoever known or yet to be discovered form) and authorize Ingeniería e Investigación to include the work in any indices and/or search engines deemed necessary for promoting its diffusion;
4. The authors accept that such authorization is given free of charge and they, therefore, waive any right to receive remuneration from the publication, distribution, public communication and any use whatsoever referred to in the terms of this authorization.