Extracting oil from coffee
Extracción de aceite de café
DOI:
https://doi.org/10.15446/ing.investig.v27n1.14774Keywords:
coffee oil, extrusion, industrialisation, coffee pulp, volatile of the coffee, sensory analysis, sensory characteristics, fixed oil (en)aceite de café, extrusión, industrialización, torta, volátiles del café, análisis sensorial, características organolépticas, aceite fijo (es)
Downloads
The present work describes oil being extracted from toasted coffee by the extrusion method; two products are obtained from this process: coffee oil and pulp. Toasted coffee was used which has a high amount of sensorial compounds. It should be noted that a significant criterion in evaluating the quality of coffee lies in its aroma.
When extracting oil from coffee, a significant part of toasted coffee’s aromatic content leaves with it, varying according to the extraction method. A fixed oil having a high volatile load is thus obtained, presenting favorable sensory characteristics. The pulp was physically and chemically analysed to show its benefit and particular properties and, according to the results so obtained, it is a product having potential usefulness.
En el presente trabajo se realiza la extracción de aceite de café mediante el método de extrusión. En dicho proceso se obtienen dos productos: el aceite de café y la torta. Para tal propósito se utilizó café tostado, el cual se caracteriza por poseer una elevada cantidad de compuestos odoríferos; es importante saber que un criterio significativo en la valoración de la calidad del café, es su aroma. Al extraer el aceite, una parte significativa del contenido aromático del café tostado, que varía según el método de extracción usado, sale con él. Es así como se obtiene un aceite fijo con una alta carga volátil, el cual presenta características organolépticas favorables.
Al segundo producto que se obtiene, se le realizó análisis físico-químico en aras de mostrar sus bondades y propiedades particulares, y de acuerdo a los resultados obtenidos, es un producto que presenta un amplio potencial de utilización.
References
Bailey, E. A., Aceites y grasas industriales., Editorial Reverté S.A., Barcelona, España, 1961.
Calle, V., Aceites de Café., Cenicafé, Colombia, 11(9), 1972, pp. 251-258.
Cardozo, L., Optimización del rendimiento en el proceso de micro encapsulación del aceite de café., Tesis de Ingeniería de Alimentos, Universidad Inca de Colombia, Bogotá, 1990.
López, F, y Castaño C. J., Determinación de las condiciones de operación para la extracción de aceite de café por extrusión., Cenicafé, Colombia, 49(3), 1998, pp. 186-196.
López, F. y Castaño, C., J., Extracción de aceite a partir de subproductos de la trilla de café pergamino., Cenicafé, Colombia, 50(1), 1999, pp. 66-77.
Falla López, L., Determinación de las Condiciones de Extracción de Aceite de Café por Extrusión., Tesis especialización Procesamiento de Alimentos, LIQC-Universidad Nacional de Colombia, Bogotá, 1988, pp. 92.
Federación Nacional de Cafeteros de Colombia., LIQC. Contribución al Estudio de los Métodos de Aromatización., Informe Interno, LIQC, Bogotá, Colombia, 1982.
Gutiérrez, E., Extracción de aceite aromatizado a partir de café tostado., Tesis Ingeniero Químico, Universidad Nacional de Colombia, Bogotá, 1987, pp. 221.
Hammel, M., Sims, R. and Feldman, J., Stabilization of Purified Coffee., U.S.A. Patent 4.155.031, United States, 1979.
ICONTEC. Café tostado y molido. Análisis de tamaño de partículas. (grado de molienda)., Norma 2441, Bogotá, Colombia, 1988. pp. 6.
ICONTEC. Café tostado y molido. Determinación del grado de tostión. Método Infrarrojo.,. Norma 2442, Bogotá, Colombia, 1987, pp. 4.
Mishkin, A., Marsh, W. and Wertheim, J., Aromatization of Powdered Coffee Products., U.S.A., Patent 3.148.070, United States, 1961.
Montes, E.R., Recuperación de volátiles de la tostación y extracción para el enriquecimiento del aceite extraído del café., Tesis Ingeniero Químico, LIQC Universidad Nacional de Colombia, Bogotá, 1987.
Morrillo, R.A., Contenido de aceite y de cafeína en el grano de café., Agronomía tropical, Venezuela, 29(2), 1979.
Njoroge, S.M., Notes on the chemical basic of coffee quality., Kenya coffee, Kenya, 57(610), 1987, pp. 152-154.
Park, J., Rhee, K.S., Kim, B.K. and Rhee, K.C., Single Screw Extrusion of Defatted Soy Flour, Cornstarch and Raw Beef Blends., Journal of Food Science, United States, 58(1), 1993, pp. 9-19.
Perry, T., Manual del Ingeniero Químico., Sexta Edición, Mc Graw Hill, México, 1992.
Riveros, T., Contribución al estudio de los ácidos grasos en el aceite de café., Tesis Químico, Universidad Nacional de Colombia., Bogotá, 1985.
Sivetz, M., Coffee Processing Technology., The AviPublishing Company, INC. London, England,1963, pp. 379.
Vargas, A. y Sánchez, A., Micro encapsulación de aceite de café., Tesis de Ingenieros Químicos, Fundación Universitaria América, Bogotá, Colombia, 1993.
How to Cite
APA
ACM
ACS
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
License
Copyright (c) 2007 Elkin Mauricio López Fontal

This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors or holders of the copyright for each article hereby confer exclusive, limited and free authorization on the Universidad Nacional de Colombia's journal Ingeniería e Investigación concerning the aforementioned article which, once it has been evaluated and approved, will be submitted for publication, in line with the following items:
1. The version which has been corrected according to the evaluators' suggestions will be remitted and it will be made clear whether the aforementioned article is an unedited document regarding which the rights to be authorized are held and total responsibility will be assumed by the authors for the content of the work being submitted to Ingeniería e Investigación, the Universidad Nacional de Colombia and third-parties;
2. The authorization conferred on the journal will come into force from the date on which it is included in the respective volume and issue of Ingeniería e Investigación in the Open Journal Systems and on the journal's main page (https://revistas.unal.edu.co/index.php/ingeinv), as well as in different databases and indices in which the publication is indexed;
3. The authors authorize the Universidad Nacional de Colombia's journal Ingeniería e Investigación to publish the document in whatever required format (printed, digital, electronic or whatsoever known or yet to be discovered form) and authorize Ingeniería e Investigación to include the work in any indices and/or search engines deemed necessary for promoting its diffusion;
4. The authors accept that such authorization is given free of charge and they, therefore, waive any right to receive remuneration from the publication, distribution, public communication and any use whatsoever referred to in the terms of this authorization.










