Correo Electrónico
DNINFOA - SIA
Bibliotecas
Convocatorias
Identidad U.N.
Published
Diseño de platos de siembra para leguminosa
Diseño de platos de siembra para leguminosas
DOI:
https://doi.org/10.15446/ing.investig.n3.28635Keywords:
agricultura, legumbres, proceso de siembra, leguminosas, maquinaria agrícola (es)agriculture, legumes, seeding process, farm machinery (en)
Downloads
En este estudio se analizan las caracteristicas de algunas semillas de leguminosas. En base a estas caracteristicas se disenaron platos de siembra adecuados. y se ensayaron a nivel de laboratorio y de campo. De acuerdo a los resultados obtenidos, se determinaron las condiciones óptimas de operación. El trabajo a su vez, crea conciencia del análisis de este tipo de problemas. causante de apreciables perdidas durante la siembra.
A research project was carried out in order to study the effect of different variables in the planting of some leguminosae, like soybeans ICA-Pance and L-108 and beans Adzuki. ICA-Gualí and ICA-Pijao.
References
Bainer, R. et. al. Principles of Farm Machinery. 4th. Ed. John Wiley and Sons. New York. 1965.
Cárdenas, A. Curso de Soya. Centro de Comunicaciones del ICA.
Culpin, C. Farm Machinery. 7th Ed. Crosby Lockood. London. 1963.
Fischer, A. Métodos Estadísticos para Investigadores. 10a. Edición. Ediciones Aguilar S. A. Madrid 1949.
García, A. Elementos de Método Estadístico. 4a. Edición. Universidad Nacional Autónoma de México. México. 1966.
García, J. Atlas de Maquinaria. 1a. Edición. Editorial Dossat, S. A. Madrid. 1956.
Hunt, D. Farm Power and Machinery Management. 5th. LEd. Iowa State University Press. Ames. Iowa. U.S.A. 1968.
ICA. Recomendaciones para el Cultivo de Frijol en Clima Caliente Moderado. Programa de Leguminosas. 1974.
Jiménez, R. and W. Buchele. The Design and Operation of a Precision Planter. ASAE paper N° 61-142. Iowa State University. Ames, Iowa. 1961.
León Garre, A. Manual de Agricultura. 2a. Edición, Salvat Editores S.A. Barcelona. 1954.
Mohsenin, N. Physical Propierties of plant and animal materials. 2nd. Department of Agricultural Engineering. Pennsylvania State University. V. 1, 2. 1968.
Restrepo, L.A. Comparación de siete variedades de soya en diferentes distancias de siembra en la región de Santagueda. Tesis de Grado. Universidad de Caldas. 1968.
Roth, L. and I. Porterfield. Some Basic Performance Characteristics of a Horizontal Plate Seed Metering Device. Transaction of the ASAE, V. 3, No. 2. 1960.
Davies, C. Maquinaria Agrícola. Editorial Aguilar. Madrid. 1956.
Smith, P. Farm Machinery and Equipment. 5th Edition. McGraw Hill. San Francisco. 1965.
Spieguel, M. Theory and Problems of Statitistics. Schaums Publishing Co. New York. 1961.
Stone, A. and H. Gulvin. Machines for Power Farming. 2nd Ed. John Wiley and Sons. New York. 1967.
Gómez, F. Evaluación de Plántulas. Centro de Comunicaciones del ICA.
Manual del IDEMA. Equipos de Ensayo de Laboratorio.
Departamento de Agricultura de los Estados Unidos de América. Semillas 2a. Edición. Compañía Editorial Continental S.A. México. 1963.
How to Cite
APA
ACM
ACS
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
CrossRef Cited-by
Dimensions
PlumX
Article abstract page views
Downloads
License
Copyright (c) 1982 José M. Chaparro C., Gabriel Gómez G., José Castelblanco C.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors or holders of the copyright for each article hereby confer exclusive, limited and free authorization on the Universidad Nacional de Colombia's journal Ingeniería e Investigación concerning the aforementioned article which, once it has been evaluated and approved, will be submitted for publication, in line with the following items:
1. The version which has been corrected according to the evaluators' suggestions will be remitted and it will be made clear whether the aforementioned article is an unedited document regarding which the rights to be authorized are held and total responsibility will be assumed by the authors for the content of the work being submitted to Ingeniería e Investigación, the Universidad Nacional de Colombia and third-parties;
2. The authorization conferred on the journal will come into force from the date on which it is included in the respective volume and issue of Ingeniería e Investigación in the Open Journal Systems and on the journal's main page (https://revistas.unal.edu.co/index.php/ingeinv), as well as in different databases and indices in which the publication is indexed;
3. The authors authorize the Universidad Nacional de Colombia's journal Ingeniería e Investigación to publish the document in whatever required format (printed, digital, electronic or whatsoever known or yet to be discovered form) and authorize Ingeniería e Investigación to include the work in any indices and/or search engines deemed necessary for promoting its diffusion;
4. The authors accept that such authorization is given free of charge and they, therefore, waive any right to receive remuneration from the publication, distribution, public communication and any use whatsoever referred to in the terms of this authorization.
