Correo Electrónico
DNINFOA - SIA
Bibliotecas
Convocatorias
Identidad U.N.
Published
Esterification reactions by catalytic distillation method (n-pentyl acetate production)
Reacciones de esterificación por el método de destilación catalítica (producción de n-pentil acetato)
Keywords:
Reactive Distillation, n-Pentyl Acetate, Esterification (en)destilación reactiva, acetato de n-pentilo, esterificación (es)
Downloads
A summary of basic characteristics for n-Pentyl Acetate production in a reactive distillation column is achieved. Computer simulation was performed to study the process and to evaluate operational alternatives. Results show that the reactive system exhibits reactive azeotropy phenomena, as is displayed in the residue curves maps illustrated here. The proposed process resulted technically viable for n-Pentyl Acetate fabrication as the principal bottom’s product of a reactive distillation column.
En el presente trabajo, se resumen las características básicas para la producción de acetato de n-pentilo en una columna de destilación reactiva se llevó a cabo una simulación para estudiar el proceso y evaluar alternativas de operación los resultados muestran que el sistema reactivo exhibe un fenómeno de isotropía reactiva, como se ilustra en los mapas de curvas residuales construidos en el presente trabajo. También se muestra, en primera instancia, que el proceso resulta técnicamente viable para la producción del éster de interés como producto principal de fondos de la columna de destilación reactiva.
Downloads
References
Aspen Technology, 2001, “Reference Manual (AES 10.2 update 1)”, AspenTech. Cambridge MA., USA.
Doherty M.F., Malone M. F.; 2001; “Conceptual Design of Distillation Systems”, Casson T., McGraw-Hill Inc.; USA.
Frey, T.; Stichlmair J., 1999, “Thermodynamic Fundamentals of Reactive Distillation”, Chem. Eng. Technol., Vol. 22, 11-18.
Hanika, J.; Kolena, J., Smejkal Q., 1999; “Butylacetate via Reactive Distillation - Modelling and Experiment”; Chem. Eng. Sci.; vol 54; 5205-5
Hauan, S., et al., 2000; “Phenomena-Based Analysis of Fixed Points in Reactive Separation Systems”, Chem. Eng. Sci.; Vol. 55, 1053-1075.
Horsley, H.; 1973; “Azeotropic Data III”, American Chemical Society; USA.
Leyes, C.; Othmer, D. 1945, “Continuous Esterification of Butanol and Acetic Acid, Kinetic and Distillation Considerations”; Trans. Amer. Inst. Chem. Engrs.; Vol. 41, 157-196.
Lee, M.; Wu, H., Lin, H.; (2000). “Kinetics of Catalytic Esterification of Acetic Acid and Amyl Alcohol over Dowex”, Industrial and Engineering Chemistry Research. Vol. 39, 4.094-4.099.
Malone, M. F.; Doherty, M. F., 2000; “Reactive Distillation (Commentaries)”; Ind. Eng. Chem. Research; Vol. 38, 3953-3957.
Lee, L.; Liang S. (1998) “Phase and Reaction Equilibria of acetic acid - 1- pentanol - water - n-amyl acetate system at 760 mm Hg”, Fluid Phase Equilibria, Vol. 149, 57-74.
Maier, R., Brennecke J.; Stadherr M.; 2000; “Reliable Computation of Reactive Azeotropes”, Com. Chem. Eng.; Vol 20, 1851-1858.
Okasinski, M.; Doherty, M. F, 1997 “Thermodynamic Behavior of Reactive Azeotropes”; AIChE Journal; vol 43; 2227-2238.
Pisarenko, R.; Serafimov, et al., 2001, “Systematic Structure Generation for Reactive Distillation Processes”; Com. Chem. Eng.; Vol. 25, 49-60.
Seider W.; Seader, J.; Lewin, D., 1999, “Process Design Principles”, Vengreaitis T., John Wiley & Sons Inc., USA.
Seader, J., Henley, E., 1998, “Separation Process Principles”, Vengreaitis T., John Wiley & Sons Inc., USA.
Taylor, R.; Krishna, R., 2000, “Modelling Reactive Distillation (review)”, Chem. Eng Sci., vol. 52; 5183-5229.
License
Copyright (c) 2004 Fernando Leiva Lenis, Álvaro Orjuela Londoño, Luis Alejandro Boyacá Mendivelso, Gerardo Rodríguez Niño, Luis María Carballo Suárez
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors or holders of the copyright for each article hereby confer exclusive, limited and free authorization on the Universidad Nacional de Colombia's journal Ingeniería e Investigación concerning the aforementioned article which, once it has been evaluated and approved, will be submitted for publication, in line with the following items:
1. The version which has been corrected according to the evaluators' suggestions will be remitted and it will be made clear whether the aforementioned article is an unedited document regarding which the rights to be authorized are held and total responsibility will be assumed by the authors for the content of the work being submitted to Ingeniería e Investigación, the Universidad Nacional de Colombia and third-parties;
2. The authorization conferred on the journal will come into force from the date on which it is included in the respective volume and issue of Ingeniería e Investigación in the Open Journal Systems and on the journal's main page (https://revistas.unal.edu.co/index.php/ingeinv), as well as in different databases and indices in which the publication is indexed;
3. The authors authorize the Universidad Nacional de Colombia's journal Ingeniería e Investigación to publish the document in whatever required format (printed, digital, electronic or whatsoever known or yet to be discovered form) and authorize Ingeniería e Investigación to include the work in any indices and/or search engines deemed necessary for promoting its diffusion;
4. The authors accept that such authorization is given free of charge and they, therefore, waive any right to receive remuneration from the publication, distribution, public communication and any use whatsoever referred to in the terms of this authorization.
