Correo Electrónico
DNINFOA - SIA
Bibliotecas
Convocatorias
Identidad U.N.
Published
Finite element modelling of manufacturing processes for plastic deformation
Modelamiento por elementos finitos de procesos de manufactura por deformación plástica
DOI:
https://doi.org/10.15446/ing.investig.v24n3.14604Keywords:
plastic deformation, finite element modelling, computational mechanics of solids, plasticity (en)deformación plástica, embutición, modelamiento por elementos finitos, mecánica computacional de sólidos, plasticidad (es)
Downloads
The object of the Mechanical and Electrical Engineering Department’s computational mechanics of solids section is to offer industry solutions to problems requiring deeper knowledge regarding the mechanics of solids and how they can be numerically modelled. This article summarizes the foundations of plastic deformation, together with the results obtained during the experimental phase and from modelling two applications of plastic deformation processes being studied as part of mechanical engineering students’ undergraduate projects.
La línea de profundización en mecánica computacional de sólidos del Departamento de Ingeniería Mecánica y Mecatrónica tiene como objetivo ofrecer a la industria soluciones a problemas que requieran del conocimiento profundo de la mecánica de sólidos y de su modelamiento numérico. El articulo presenta de una manera resumida los fundamentos del modelamiento del fenómeno de deformación plástica, junto con los resultados obtenidos en la fase experimental y de modelamiento de dos aplicaciones de procesos de deformación plástica, estudiadas a través de proyectos de grado de estudiantes de ingeniería mecánica.
References
Bathe, Klauss Jürgen, Finite Elements Procedures, Prentice Hall.
Dieter, George E., Mechanical Metallurgy, Mc-Graw Hill, 1976.
Manual de programador del lenguaje APDL DE Ansys, Ayuda del programa.
Mase, George E., Mecánica del medio continuo, Mc-Graw Hill, 1977.
Mejía, Fernando, «Modelamiento por elementos finitos de comportamientos no lineales en mecánica de sólidos», trabajo de promoción a profesor titular, Universidad Nacional de Colombia, 2002.
Medelson, Alexander, Plasticity Theory and Application, Macmillan Company, 1968.
Oehlert, Gerard, Herramientas de troquelar, estampar y embutir. Editorial Gustavo Gili S.A, 1968.
Saeed, Moaveni, Finite Elements, Theory and Application with ANSYS, Prentice-Hall, 1999.
Zienkiewicz C. O. and Morgan, Kenneth. Finite Elements and Approximation, Singapore, John Wiley & Sons, Inc., 1983.
Zienkiewicz C. O and Taylor R. L., El método de los elementos finitos, cuarta edición, Volumen 2. Barcelona, España. Mc-Graw Hill, 1994.
How to Cite
APA
ACM
ACS
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
CrossRef Cited-by
Dimensions
PlumX
- Captures
- Mendeley - Readers: 1
Article abstract page views
Downloads
0
License
Copyright (c) 2004 Fernando Mejía Umaña
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors or holders of the copyright for each article hereby confer exclusive, limited and free authorization on the Universidad Nacional de Colombia's journal Ingeniería e Investigación concerning the aforementioned article which, once it has been evaluated and approved, will be submitted for publication, in line with the following items:
1. The version which has been corrected according to the evaluators' suggestions will be remitted and it will be made clear whether the aforementioned article is an unedited document regarding which the rights to be authorized are held and total responsibility will be assumed by the authors for the content of the work being submitted to Ingeniería e Investigación, the Universidad Nacional de Colombia and third-parties;
2. The authorization conferred on the journal will come into force from the date on which it is included in the respective volume and issue of Ingeniería e Investigación in the Open Journal Systems and on the journal's main page (https://revistas.unal.edu.co/index.php/ingeinv), as well as in different databases and indices in which the publication is indexed;
3. The authors authorize the Universidad Nacional de Colombia's journal Ingeniería e Investigación to publish the document in whatever required format (printed, digital, electronic or whatsoever known or yet to be discovered form) and authorize Ingeniería e Investigación to include the work in any indices and/or search engines deemed necessary for promoting its diffusion;
4. The authors accept that such authorization is given free of charge and they, therefore, waive any right to receive remuneration from the publication, distribution, public communication and any use whatsoever referred to in the terms of this authorization.
