Published

2004-01-01

Development of the software Conden 1.0 in finite differences to model electrostatics problems 2D

Desarrollo del motor de cálculo Conden 1.0 en diferencias finitas para modelar problemas electrostáticos 2D

DOI:

https://doi.org/10.15446/ing.investig.v24n1.33455

Keywords:

Over-relaxation, finite differences (en)
sobrerrelajación, diferencias finitas (es)

Downloads

Authors

  • Wilson Rodríguez Calderón Universidad Politécnica de Cataluña
  • Myriam Rocio Pallares Muñoz Universidad Politécnica de Cataluña

The present work consists on the development and implementation of the finite differences method for over -relaxation adapted to irregular meshes to determine the influence of the air frontiers on the potential values and field electricians, calculated inside a badges parallel condenser, using GID like a pre/post-process platform and Fortran like a programming language of the calculation motor of differences Conden 1.0. The problem domain is constituted by two rectangles that represent the condenser and the air layer that covers it, divided in rectangular meshes no standardize. 

El presente trabajo consiste en el desarrollo e implementación del método de diferencias finitas por sobrerrelajación. adaptado a mallas irregulares para determinar la influencia de las fronteras de aire sobre los valores de potencial y campo eléctricos, calculados dentro de un condensador de placas paralelas. empleando GID como plataforma de pre/posproceso y Fortran como lenguaje de programación del motor de cálculo de diferencias Canden 1.0. El dominio del problema está constituido por dos rectángulos que representan al condensador y a la capa de aire que lo cubre, divididos en mallas rectangulares no uniformes. 

References

Geral, Weley Análisis numérico con aplicaciones, 6ta ed., 595-695.

Mathews John H., D. Fink Kurtis, Métodos numéricos con Matlab, 557-582.

Mora, Javier; Oñate, Eugenio y Canet, Juan Miguel, Electromagnetismo, Cimne, 1999.

Ribó R., GID User Manual Cimne, 1999.

Swanson Analysis Systems, Inc., “Ansys User Manual", revision 5.0, Houston.

Zarate F, Oñate E., Caltep: Programa para el cálculo transitorio de la ecuación de Poisson, Cimne, 1993.

Zienkiewicz, O. C. y Taylor, R. L., El método de los elementos finitos, 4ta ed., Vol. 1, Barcelona, McGraw-Hill, 1994.

Zienkiewicz, O. C. y Taylor, R. L., El método de los elementos finitos, 4ta ed., Vol. 2, Barcelona, McGraw-Hill, 1994.

How to Cite

APA

Rodríguez Calderón, W. and Pallares Muñoz, M. R. (2004). Development of the software Conden 1.0 in finite differences to model electrostatics problems 2D . Ingeniería e Investigación, 24(1), 85–94. https://doi.org/10.15446/ing.investig.v24n1.33455

ACM

[1]
Rodríguez Calderón, W. and Pallares Muñoz, M.R. 2004. Development of the software Conden 1.0 in finite differences to model electrostatics problems 2D . Ingeniería e Investigación. 24, 1 (Jan. 2004), 85–94. DOI:https://doi.org/10.15446/ing.investig.v24n1.33455.

ACS

(1)
Rodríguez Calderón, W.; Pallares Muñoz, M. R. Development of the software Conden 1.0 in finite differences to model electrostatics problems 2D . Ing. Inv. 2004, 24, 85-94.

ABNT

RODRÍGUEZ CALDERÓN, W.; PALLARES MUÑOZ, M. R. Development of the software Conden 1.0 in finite differences to model electrostatics problems 2D . Ingeniería e Investigación, [S. l.], v. 24, n. 1, p. 85–94, 2004. DOI: 10.15446/ing.investig.v24n1.33455. Disponível em: https://revistas.unal.edu.co/index.php/ingeinv/article/view/33455. Acesso em: 20 jan. 2025.

Chicago

Rodríguez Calderón, Wilson, and Myriam Rocio Pallares Muñoz. 2004. “Development of the software Conden 1.0 in finite differences to model electrostatics problems 2D ”. Ingeniería E Investigación 24 (1):85-94. https://doi.org/10.15446/ing.investig.v24n1.33455.

Harvard

Rodríguez Calderón, W. and Pallares Muñoz, M. R. (2004) “Development of the software Conden 1.0 in finite differences to model electrostatics problems 2D ”, Ingeniería e Investigación, 24(1), pp. 85–94. doi: 10.15446/ing.investig.v24n1.33455.

IEEE

[1]
W. Rodríguez Calderón and M. R. Pallares Muñoz, “Development of the software Conden 1.0 in finite differences to model electrostatics problems 2D ”, Ing. Inv., vol. 24, no. 1, pp. 85–94, Jan. 2004.

MLA

Rodríguez Calderón, W., and M. R. Pallares Muñoz. “Development of the software Conden 1.0 in finite differences to model electrostatics problems 2D ”. Ingeniería e Investigación, vol. 24, no. 1, Jan. 2004, pp. 85-94, doi:10.15446/ing.investig.v24n1.33455.

Turabian

Rodríguez Calderón, Wilson, and Myriam Rocio Pallares Muñoz. “Development of the software Conden 1.0 in finite differences to model electrostatics problems 2D ”. Ingeniería e Investigación 24, no. 1 (January 1, 2004): 85–94. Accessed January 20, 2025. https://revistas.unal.edu.co/index.php/ingeinv/article/view/33455.

Vancouver

1.
Rodríguez Calderón W, Pallares Muñoz MR. Development of the software Conden 1.0 in finite differences to model electrostatics problems 2D . Ing. Inv. [Internet]. 2004 Jan. 1 [cited 2025 Jan. 20];24(1):85-94. Available from: https://revistas.unal.edu.co/index.php/ingeinv/article/view/33455

Download Citation

CrossRef Cited-by

CrossRef citations0

Dimensions

PlumX

Article abstract page views

305

Downloads

Download data is not yet available.
Crossref
Scopus
Google Scholar
Europe PMC

License

Copyright (c) 2004 Wilson Rodríguez Calderón, Myriam Rocio Pallares Muñoz

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The authors or holders of the copyright for each article hereby confer exclusive, limited and free authorization on the Universidad Nacional de Colombia's journal Ingeniería e Investigación concerning the aforementioned article which, once it has been evaluated and approved, will be submitted for publication, in line with the following items:

1.    The version which has been corrected according to the evaluators' suggestions will be remitted and it will be made clear whether the aforementioned article is an unedited document regarding which the rights to be authorized are held and total responsibility will be assumed by the authors for the content of the work being submitted to Ingeniería e Investigación, the Universidad Nacional de Colombia and third-parties;

2.    The authorization conferred on the journal will come into force from the date on which it is included in the respective volume and issue of Ingeniería e Investigación in the Open Journal Systems and on the journal's main page (https://revistas.unal.edu.co/index.php/ingeinv), as well as in different databases and indices in which the publication is indexed;

3.    The authors authorize the Universidad Nacional de Colombia's journal Ingeniería e Investigación to publish the document in whatever required format (printed, digital, electronic or whatsoever known or yet to be discovered form) and authorize Ingeniería e Investigación to include the work in any indices and/or search engines deemed necessary for promoting its diffusion;

4.    The authors accept that such authorization is given free of charge and they, therefore, waive any right to receive remuneration from the publication, distribution, public communication and any use whatsoever referred to in the terms of this authorization.