Analysing chemical equilibrium conditions when studying butyl acetate synthesis
Estudio de la síntesis de acetato de butilo - 2. Análisis de las condiciones de equilibrio químico
DOI:
https://doi.org/10.15446/ing.investig.v25n3.14670Palabras clave:
ion exchange resins, esterification, butyl acetate, chemical equilibrium (en)resinas de intercambio, esterificación, acetato de butilo, equilibrio químico (es)
Descargas
This work studied the liquid phase of acetic acid and butyl alcohol esterification reaction (Patm = 560 mmHg), using an ion exchange resin (Lewatit K-2431) as catalyst. A set of assays were carried out for determining the effect of catalyst load, temperature and molar ratio (acid/alcohol) on chemical equilibrium constant. Components' selective sorption on the resin matrix was noticed; its effect on equilibrium conditions was verified, by using different acid/alcohol starting ratios. A non-ideal model (UNIQUAC) was used for calculating component activities. Standard free energy and enthalpy of esterification were calculated (∆G° = -1.874 Kcal/mol, ∆H° = -5.335 Kcal/ mol), corresponding to reported data from previous work. An expression for calculating apparent equilibrium constant was obtained, considering thermal effects and those associated with liquid-polymer phase equilibrium. Such expression had good agreement with experimental and reported data.
En este trabajo se adelantó un estudio de la reacción de esterificación de ácido acético y n-butanol en fase liquida (Patm = 560 mmHg), utilizando una resina de intercambio iónico (Lewatit K-2431) como catalizador. Se efectuaron ensayos para determinar la influencia de la carga del catalizador, la temperatura y la relación molar de alimentación (ácido/alcohol), sobre la constante de equilibrio químico. Se pudo reconocer el fenómeno de adsorción selectiva de los componentes sobre la matriz de la resina, y se comprobó su efecto sobre las condiciones de equilibrio químico, para diferentes relaciones iniciales de ácido y alcohol. Se utilizó un modelo no ideal (UNIQUAC) para evaluar las actividades de los componentes, y se realizó el cálculo de la energía libre y la entalpia estándares de la esterificación (∆G°= -1.874 Kcal/mol, ∆H°= -5.335 Kcal/mol), las cuales corresponden con lo reportado en trabajos previos. Finalmente, se obtuvo una expresión que permite evaluar la constante de equilibrio químico, de carácter aparente, donde se toman en cuenta los efectos térmicos y los asociados al equilibrio de fases liquido-polímero. Dicha expresión concuerda con los datos experimentales y con los reportados en otros estudios.
Referencias
Al-Saadi, A.; Jefreys, G. "Esterification of butanol in a two-phase liquid/liquid system". AIChE Journal 27: 754-773, 1981 DOI: https://doi.org/10.1002/aic.690270508
Altiokka, M.; Cytak, A. "Kinetics study of esterification of acetic acid with isobutanol in the presence of amberlite catalyst". Appl. Catalysis A: General 239: 141-148, 2003. DOI: https://doi.org/10.1016/S0926-860X(02)00381-2
Anasthas, H.; Gaikar, V. "Removal of acetic acid impurities from ethyl acetate by adsorption on ion exchange resins". Separation Science and Technology, 36(12), 2.623-2.646, 2001. DOI: https://doi.org/10.1081/SS-100107216
Armor, J. N. "Overcoming equilibrium limitations in chemical processes". Appl. Catalysis A: General 222: 91-99, 2001. DOI: https://doi.org/10.1016/S0926-860X(01)00833-X
Baba, T.; Ono, Y. "Heteropolyacids and their salts supported on acidic ion-exchange resin as highly active solid-acid catalysts". Applied Catalysis, 22: 321-324, 1986 DOI: https://doi.org/10.1016/S0166-9834(00)82639-1
Bayer AG. "Catalysis and chemical processing with Lewatit®. Technical Information". Leverkusen - Germany, 2001.
Bayer AG. "Bayer Catalyst K 2431 Product Information". Leverkusen - Germany, 2001.
Bevia, F et al. "Quaternary liquid-liquid equilibrium: water - acetic acid - butanol - n-butyacetate at 25°C". Fluid Phase Equilibria, 18: 171-183, 1984. DOI: https://doi.org/10.1016/0378-3812(84)87005-3
Bianchi, C. et al. "A new method to clean industrial water from acetic acid via esterification". Applied Catalysis B: Environmental 40: 93 - 99, 2003. DOI: https://doi.org/10.1016/S0926-3373(02)00144-3
Bourbigou, H.; Magna, L. "Ionic liquids: perspectives for organic and catalytic reactions". Journal of Molecular Catalysis A: Chemical 182-183: 419-437, 2002. DOI: https://doi.org/10.1016/S1381-1169(01)00465-4
Choudhary, V. et al. "Selective esterification of tert-butanol by acetic acid anhydride over clay supported InCl3, GaCl3, FeCl3 and InCl2 catalysts". Catalysis Communications 2: 57 - 61, 2001. DOI: https://doi.org/10.1016/S1566-7367(01)00010-3
Chu, W. et al. "Design and Elaboration of New Solid Acids for the Synthesis of Butylacetate". Catalysis Today, 90: 349 - 353, 2004. DOI: https://doi.org/10.1016/j.cattod.2004.04.046
Dhanuka, V. R. et al. "Kinetics of liquid phase esterification of carboxylic acid with alcohols in the presence of acid catalysts". Chem. Eng. Sci. Vol. 32, pp 551-556, 1977. DOI: https://doi.org/10.1016/0009-2509(77)87013-9
Di Girolamo, M.; Marchionna, M. "Acidic and basic ion exchange resins for industrial applications". Journal of Molecular Catalysis A: Chemical 177: 33-40, 2001. DOI: https://doi.org/10.1016/S1381-1169(01)00307-7
El-Sharkawy, E., Al-Shihry, S. "Preparation of Butyl Acetate Using Solid Acid Catalysts: Textural and Structural Characterization". Materials Letters 58: 2.122-2.127, 2004. DOI: https://doi.org/10.1016/j.matlet.2004.01.021
Esquivel, M.; Bernardo-Gil, M. "Liquid-liquid equilibria for the systems water - alcohols - acetic acid". Fluid Phase Equilibria, 57: 307-316, 1990. DOI: https://doi.org/10.1016/0378-3812(90)85129-X
Gangadwala, J. et al. "Esterification of Acetic Acid with Butanol in the presence of Ion-exchange resins as Catalysts". Ind. Eng. Chem. Res. Vol. (42): 2.146-2.155, 2003. DOI: https://doi.org/10.1021/ie0204989
Gangadwala, J. et al. "Production of Butyl Acetate by Catalytic Distillation: Process Design Studies". Ind. Eng. Chem. Res. Vol. (43): 136-143, 2004. DOI: https://doi.org/10.1021/ie021011z
Groggins, P Unit Processes in organic synthesis. Mc. Graw-Hill Book Co, New York, 1958.
Hanika, J.; et al. "Multi-functional trickle bed reactor for Butylacetate Synthesis". Catalysis Today, Vol. 79-80: 83 - 87, 2003. DOI: https://doi.org/10.1016/S0920-5861(03)00013-0
Hanika, J.; Kolena, J.; Smejkal, Q. "Butylacetate via reactive distillation - modelling and experiment". Chem. Eng. Sci., Vol. 54; 5.205-5.209, 1999. DOI: https://doi.org/10.1016/S0009-2509(99)00241-9
Harmer, M.; Sun, Q. "Solid acid catalysis using ion-exchange resins". Appl. Catalysis A: General, 221: 4562, 2001. DOI: https://doi.org/10.1016/S0926-860X(01)00794-3
Izumi, Y.; Urabe, K.; Onaka, M. "Advances in liquid-phase organic reactions using heteropolyacid and clay". Micro. and Meso. Mat. 21: 227-233, 1998. DOI: https://doi.org/10.1016/S1387-1811(98)00029-8
Kirk, R.; Othmer, D. Encyclopedia of Chemical Technology. 4° Ed., John Wiley & Sons Inc, 1998.
Lee, M. et al. "Kinetics of Catalytic Esterification of Acetic Acid and Amyl Alcohol over Dowex". Ind. Eng. Chem. Res. Vol. (39): 4.094-4.099, 2000. DOI: https://doi.org/10.1021/ie0000764
Lee, M. et al. "Simultaneous Chemical and Phase Equilibria for Mixtures of Acetic Acid, Amyl alcohol, Amyl Acetate, and Water". Ind. Eng. Chem. Res. Vol. (39): 4.383-4.391, 2000. DOI: https://doi.org/10.1021/ie000019a
Lee, M. et al. "Kinetics of Catalytic Esterification of Propionic Acid and n-Butanol over Amberlyst 35". Ind. Eng. Chem. Res. Vol. (41): 2.882-2.887, 2002. DOI: https://doi.org/10.1021/ie0105472
Leyes, C.; Othmer D. "Continuous Esterification of Butanol and Acetic Acid, Kinetic and Distillation Considerations". Trans. Amer. Inst. Chem. Engrs.; Vol. 41: 157-196, 1945.
Liu, O.; Chen, H. "Modeling of esterification of acetic acid with n-butanol in the presence of Zr(SO4)2-4H2O coupled pervaporation". Journal of Membrane Science 196: 171-178, 2002. DOI: https://doi.org/10.1016/S0376-7388(01)00543-9
Liu, W. T.; Tan, C. S. "Liquid-phase esterification of propionic acid with n-butanol". Ind. Eng. Chem. Res. Vol. 40: 3.281-3.286, 2001. DOI: https://doi.org/10.1021/ie001059h
Löning S.; Horst C.; Hoffmann U. "Theorical Investigation on the quaternary system n-butanol, butyl acetate, acetic acid and water". Chem. Eng. Tech., Vol. (23), No. (9): 789-793, 2000. DOI: https://doi.org/10.1002/1521-4125(200009)23:9<789::AID-CEAT789>3.0.CO;2-E
Ma, Y. et al. Zeolite-catalyzed esterification I. "Synthesis of acetates, benzoates and phtalates". Applied Catalysis A: General 139: 51-57, 1996. DOI: https://doi.org/10.1016/0926-860X(95)00328-2
Mazzotti, et al. "Kinetics of Liquid-Phase Esterification Catalyzed by Acidic Resins". Ind. Eng. Chem. Res. Vol. (36): 3-10, 1997. DOI: https://doi.org/10.1021/ie960450t
Orjuela, A. et al. "Estudio de la síntesis de acetato de butilo - 1. Selección del catalizador". Ingenieria e Investigación, Publ. Fac. Ing. Universidad Nacional de Colombia, Bogotá, Vol. (45): 50-60, 2004.
Orjuela, A. et al. "Evaluación de resinas de intercambio comerciales como catalizadores en reacciones de esterificación". NOOS, Revista Depto. Ciencias, UN-Manizales, No. 14, 157-169, 2001.
Orjuela, A. "Evaluación de un sistema de destilación reactiva a nivel de planta piloto en reacciones de esterificación". Proyecto de grado de maestría en Ing. Química, Universidad Nacional de Colombia, Bogotá, 2003.
Santacesaria, E. "Acetic acid Esterification catalyzed by mordenite". Notes Journal of Catalysis Vol. 85: 519-520,1984. DOI: https://doi.org/10.1016/0021-9517(84)90240-9
Smejkal, Q.; Soos, M. "Comparison of computer simulation of reactive distillation using ASPEN PLUS and HYSYS software". Chem. Eng. and Proc., Vol. 41, 413-418, 2002. DOI: https://doi.org/10.1016/S0255-2701(01)00160-X
Song, W. et al. "Measurement of Residue Curve Maps and Heterogeneous Kinetics in Methyl Acetate Synthesis". Ind. Eng. Chem. Res. Vol. (37): 1.917-1.928, 1998. DOI: https://doi.org/10.1021/ie9708790
Steinigeweg, S.; Gmehling, J. "n-Butyl Acetate Synthesis via Reactive Distillation: Thermodynamic Aspects, Reaction Kinetics, Pilot-Plant Experiments, and Simulation Studies". Ind. Eng. Chem. Res., 41, 5.4835.490, 2002. DOI: https://doi.org/10.1021/ie020179h
Tanabe, K.; Hölderich, W. "Industrial application of solid acid-base catalysis". Appl. Catalysis A: General,181: 399 - 434, 1999. DOI: https://doi.org/10.1016/S0926-860X(98)00397-4
Venimadhavan, G. et al. "A novel distillate policy for batch reactive distillation with application to the production of butyl acetate". Ind. Eng. Chem. Res. Vol. (38): 714-722,1999. DOI: https://doi.org/10.1021/ie9804273
Wang, S. et al. "Control of a Reactive Distillation Column in the Kinetic Regime for the Synthesis of n-butyl Acetate". Ind. Eng. Chem. Res. Vol. (42): 5.1825.194, 2003. DOI: https://doi.org/10.1021/ie0209172
Wasylkiewicz, S., Ung, S. "Global phase stability analysis for heterogeneous reactive mixtures and calculation of reactive liquid-liquid and vapor-liquid-liquid equilibria". Fluid Phase Equilibria 175, No. 1-2: 253-272, 2000. DOI: https://doi.org/10.1016/S0378-3812(00)00451-9
Xu, Z.; Chuang, K. "Kinetics of Acetic Acid Esterification over Ion Exchange Catalysts". The Canadian Jour. of Chem. Eng. Vol (74): 493-500, 1996. DOI: https://doi.org/10.1002/cjce.5450740409
Zhicai, Y.; Xianbao, C.; Jing, G. "Esterification-Distillation of Butanol and Acetic Acid". Chem. Eng. Sci. Vol. (53): 2.081-2.088, 1998. DOI: https://doi.org/10.1016/S0009-2509(98)00020-7
Cómo citar
APA
ACM
ACS
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Descargar cita
CrossRef Cited-by
Dimensions
PlumX
Visitas a la página del resumen del artículo
Descargas
Licencia
Derechos de autor 2005 Álvaro Orjuela Londoño, Fernando Leiva Lenis, Luis Alejandro Boyacá Mendivelso, Gerardo Rodríguez Niño, Luis María Carballo Suárez
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Los autores o titulares del derecho de autor de cada artículo confieren a la revista Ingeniería e Investigación de la Universidad Nacional de Colombia una autorización no exclusiva, limitada y gratuita sobre el artículo que una vez evaluado y aprobado se envía para su posterior publicación ajustándose a las siguientes características:
1. Se remite la versión corregida de acuerdo con las sugerencias de los evaluadores y se aclara que el artículo mencionado se trata de un documento inédito sobre el que se tienen los derechos que se autorizan y se asume total responsabilidad por el contenido de su obra ante la revista Ingeniería e Investigación, la Universidad Nacional de Colombia y ante terceros.
2. La autorización conferida a la revista estará vigente a partir de la fecha en que se incluye en el volumen y número respectivo de la revista Ingeniería e Investigación en el Sistema Open Journal Systems y en la página principal de la revista (https://revistas.unal.edu.co/index.php/ingeinv), así como en las diferentes bases e índices de datos en que se encuentra indexada la publicación.
3. Los autores autorizan a la revista Ingeniería e Investigación de la Universidad Nacional de Colombia para publicar el documento en el formato en que sea requerido (impreso, digital, electrónico o cualquier otro conocido o por conocer) y autorizan a la revista Ingeniería e Investigación para incluir la obra en los índices y buscadores que estimen necesarios para promover su difusión.
4. Los autores aceptan que la autorización se hace a título gratuito, por lo tanto renuncian a recibir emolumento alguno por la publicación, distribución, comunicación pública y cualquier otro uso que se haga en los términos de la presente autorización.